ICON AFP AIFRAME PRO Owner's Instruction Manual

REPLACEMENT RECOMMENDATION
The fi ve-year helmet replacement recommendation is based on a consensus of the majority
of helmet manufacturers. Glues, resins and other materials used in helmet production can
affect liner materials over time. Hair oils, body fl uids and cosmetics, as well as normal
"wear and tear" also contribute to helmet liner degradation.
Additionally, petroleum-based products present in cleaners, paints, fuels, and other
commonly encountered materials may break down materials used in the construction of
many helmets, possibly compromising performance. Experience indicates that helmet
standards are revised every fi ve years. This, coupled with advances in materials, designs
and production methods suggest that it is in the rider's best interest to replace his/her
helmet every fi ve years at a minimum.
ICON IS A REGISTERED TRADEMARK. ALL RIGHTS RESERVED. COPYRIGHT© 2015 LEMANS CORPORATION.
®
REPLACEMENT PARTS AND SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE. PRINTED IN SOUTH KOREA.
J-TECH CORP. Made in South Korea ECE/DOT/SAI/PSC
OWNERS INSTRUCTION MANUAL
SAFETY WARNING: FOR YOUR SAFETY, IT IS IMPORTANT THAT YOU COMPLETELY READ THIS OWNER'S MANUAL AND ALL WARNING LABELS ON
AND INSIDE THE HELMET. THE INSTRUCTIONS IN THIS MANUAL ARE DESIGNED TO HELP YOU SELECT THE RIGHT HELMET, WEAR IT PROPERLY,
TAKE CARE OF IT AND KNOW WHEN TO REPLACE IT. FAILURE TO FOLLOW THESE INSTRUCTIONS MAY INCREASE YOUR RISK OF SERIOUS
INJURY OR DEATH IN AN ACCIDENT. IN ORDER TO GET THE MOST PROTECTION POSSIBLE FROM YOUR HELMET, YOU SHOULD ALWAYS DO THE
FOLLOWING – WEAR YOUR HELMET WHEN YOU RIDE, HANDLE YOUR HELMET CAREFULLY TO AVOID ACCIDENTAL DAMAGE AND RIDE SAFE. DO
NOT TAKE RISKS BECAUSE YOU ARE WEARING A HELMET.