Related Manuals for Supermicro SSE-G3748R-SONIC
Summarization of Contents
Preface
About this Manual
Provides installation and use information for system integrators and technicians.
Notes
Provides links to product manuals, safety information, and support contacts.
Warnings
Explains warning symbols used in the manual regarding injury and high voltage.
Contacting Supermicro
Provides contact information for Supermicro headquarters, Europe, and Asia-Pacific.
Chapter 1 Introduction
1.1 Introduction
Provides information for configuring basic switch functionalities via CLI commands.
1.2 Overview
Describes the SSE-G3748 series switch features and benefits.
1.3 Features
Lists key features of the SSE-G3748 series Ethernet switches.
1.4 Physical Characteristics
Details the physical specifications of the SSE-G3748 series Ethernet switches.
Chapter 2 Standardized Warning Statements
About Standardized Warning Statements
Explains the purpose of industry standard warnings for user safety.
Warning Definition
Defines the warning symbol indicating danger and potential bodily injury.
Installation Instructions
Advises reading installation instructions before connecting the system to power.
Circuit Breaker Warning
Warns about ensuring the protective device is rated not greater than 250V, 20A.
Power Disconnection Warning
Warns to disconnect all power sources before servicing the unit.
Equipment Installation Warning
States only trained personnel should install, replace, or service equipment.
Restricted Area Warning
Warns the unit is for installation in restricted access areas only.
Battery Handling Warning
Warns of explosion danger if the battery is replaced incorrectly.
Redundant Power Supplies Warning
Warns all connections must be removed to de-energize the unit with multiple PSUs.
Backplane Voltage Warning
Warns of hazardous voltage on the backplane when the system is operating.
Electrical Codes Compliance Warning
Warns that installation must comply with local and national electrical codes.
Product Disposal Warning
Warns that disposal must follow all national laws and regulations.
Hot Swap Fan Warning
Warns about hazardous moving parts, especially fan blades.
Power Cable and AC Adapter Warning
Warns to use provided cables/adapters to prevent malfunction or fire.
Chapter 3 Installation and Setup
3.1 SSE-G3748/D/R/DR-SONIC Installation and Configuration
Covers installation and configuration for SSE-G3748/D/R/DR-SONIC switches.
Accessing CLI via Serial Console
Steps to access the switch's CLI using a serial console.
Accessing CLI via SSH
Steps to access the switch's CLI using SSH.
Firmware Upgrading Procedures
Details methods for upgrading the SONIC firmware.
3.2 SSE-G3748/D/R/DR-SMIS Installation and Configuration
Covers installation and configuration for SSE-G3748/D/R/DR-SMIS switches.
Web-based Management Utility
How to configure the SMIS switch via a web browser.
Accessing CLI through Telnet
Steps to access the SMIS switch's CLI using Telnet.
Accessing CLI through Serial Console
Steps to access the SMIS switch's CLI using a serial console.
Chapter 4 Ports and Indicators
4.1 Front View
Details and illustrates the ports and features on the front panel of the switch.
4.2 Rear View
Details and illustrates the ports and features on the rear panel of the switch.
4.3 Ports
Describes the types of ports available on the SSE-G3748 series switches.
4.4 Indicators
Details the LED indicators on the front and rear panels of the switch.
Appendix A Rack Installation
A.1 Overview
Introduces the optional rail kit for easy rack installation of Supermicro switches.
A.2 Unpacking the System
Instructions for inspecting the switch upon arrival and choosing a suitable location.
A.3 Preparing for Setup
Details the contents of the rail kit and choosing a setup location.
A.4 Warnings and Precautions
Covers rack and general safety precautions for installation.
Lithium Battery Precaution
Warns about the danger of explosion if a lithium battery is replaced incorrectly.
Rack Mounting Considerations
Discusses ambient temperature, airflow, mechanical loading, and circuit overloading.
Reliable Grounding
Emphasizes the importance of maintaining a reliable ground connection for the rack.
A.5 Rack Mounting Instructions
Provides instructions for installing the switch into a rack using a rail kit.
Rack Bracket Installation
Steps for fixing the rack bracket to the switch.
Installing the Inner Rails
Instructions for attaching the inner rails to the switch.
Installing Outer Rails onto the Rack
Steps for assembling and installing the outer rails on the rack.
Installing the Switch into a Rack
Procedure for sliding the switch with inner rails into the outer rails on the rack.
Need help?
Do you have a question about the SSE-G3748R-SONIC and is the answer not in the manual?
Questions and answers