Download Print this page

Advertisement

Quick Links

ORIGINAL INSTRUCTIONS
OPERATOR'S MANUAL
- according to Directive 2006/42/EC, Annex I 1.7.4.1
Steiger
Steiger
Steiger
Steiger
Steiger
Steiger
Steiger
Quadtrac
Quadtrac
Quadtrac
Quadtrac
Quadtrac
Stage IV
PIN JEEZ00000FF314001 and above
Part number 47739260
370
®
420
®
470
®
500
®
540
®
580
®
620
®
470
®
500
®
540
®
580
®
620
®
Tractor
1
edition English
st
September 2017

Advertisement

loading
Need help?

Need help?

Do you have a question about the Quadtrac 580 and is the answer not in the manual?

Questions and answers

Summarization of Contents

General Information
Note to the Owner
Provides essential information on safe operation, adjustment, and maintenance of the tractor.
Intended Use
Defines the authorized applications of the tractor and the responsibilities of the operator.
CNH Industrial America LLC Technical Manuals
Details how to obtain manuals and the manufacturer's policy on product improvements.
Manual Scope and Required Training Level
Explains the manual's content and the necessary operator training for tractor operation.
Your Tractor
Identifies the specific Steiger and Quadtrac models covered by this manual.
Electro-Magnetic Compatibility (EMC)
Addresses EMC compliance and precautions for add-on equipment to prevent interference.
Safety Information
Safety Alert Symbol and Signal Word Definition
Explains the meaning of safety symbols and signal words used in the manual.
Safety Rules
Lists general safety rules and best practices for operating the tractor.
Ecology and the Environment
Discusses environmental considerations and responsible operation.
Noise Levels
Provides information on noise exposure limits and protection.
Vehicle Vibration Levels
Details information regarding vehicle vibration and operator comfort/safety.
Protective Structures
Describes the safety features and structures designed to protect the operator.
Hazardous Substances
Warns about hazardous materials used in the tractor and necessary precautions.
Emergency Exit
Outlines procedures for safe emergency exit from the tractor cab.
Articulation Cylinder Locking Blocks
Explains the use and importance of locking blocks for the articulation cylinder.
Safety Aspects
Covers general safety considerations and potential hazards.
Safety Signs
Describes the location and meaning of safety signs on the tractor.
Wheel Chocks (Germany Only)
Specific safety instruction regarding wheel chocks in Germany.
Controls and Instruments
Access to Operator's Platform
Details how to safely access and exit the operator's platform.
Operator's Seat
Covers the overview and control identification for the operator's seat.
Passenger Seat
Provides an overview of the passenger seat.
Forward Controls
Describes the controls located at the front of the operator's station.
Left-Hand Side Controls
Details the controls located on the left side of the operator's console.
Right-Hand Side Controls
Covers the controls situated on the right side of the operator's console.
Rearward Controls
Describes controls located towards the rear of the operator's station.
Overhead Controls
Details the controls and functions accessible from the overhead console.
Exterior Controls
Explains external controls like hitch and mirrors.
Instrument Cluster
Overview of gauges, displays, and warning lights on the instrument panel.
Operating Instructions
Commissioning the Unit
Steps for initial setup and preparation before starting the tractor.
Starting the Unit
Procedures for starting the tractor engine under various conditions.
Stopping the Unit
Instructions for properly stopping the tractor and its engine.
Moving the Unit
Guidance on operating the tractor's movement systems and transmission.
Parking the Unit
Procedures for safely parking the tractor, including park lock engagement.
Transport Operations
Road Transport
Safety and operational guidelines for transporting the tractor on roads.
Shipping Transport
Instructions for securing the tractor for shipping.
Recovery Transport
Safety rules and procedures for towing or recovering the tractor.
Working Operations
General Information
Overview of working operations and product highlights.
Rear Power Take-Off (PTO)
Safety rules and operation procedures for the rear PTO.
Three-Point Hitch
Detailed information on the three-point hitch system, including operation and adjustment.
Drawbars and Towing Attachments
Safety rules and capacities related to drawbars and towing.
Trailer Brake Coupler
Safety rules and connection procedures for trailer brakes.
Auxiliary Power Connections
Information on external power and cab connections.
Hydraulic Remote Control Valves
Details on valve couplers, circuits, and operating controls.
Auto Auxiliary Mode Operation
Explains the operation of the auto auxiliary mode.
Auto Depth Control Operation
Details how to operate the auto depth control feature.
Ballasting the Tractor
Guidelines
General guidelines for ballasting the tractor for optimal performance and safety.
Weights, Cast Metal and Liquid
Information on different types of ballast and their application.
Wheel Weight Bolt Torque
Specifications for wheel weight bolt torque.
Wheel Slip
Explains how to monitor and manage wheel slip.
Front and Rear Axle
Tire Safety
Safety precautions related to tractor tires.
Pressure and Load Ratings
Details tire pressure and load capacity specifications.
Wheel Installation
Procedures for installing tractor wheels correctly.
Wheel Tread Settings on Flange Axles
Instructions for adjusting wheel tread on flange axles.
Wheel Tread Settings on Bar Axles
Instructions for adjusting wheel tread on bar axles.
Pre-conditioning Rubber Tracks
Guidance on preparing rubber tracks before use.
Maintenance
General Information
Provides an overview of maintenance practices and schedules.
Engine Hood
Instructions for opening and closing the engine hood.
Engine Side Shields
Information on accessing and maintaining engine side shields.
Opening the Right-Hand Service Door
Steps for opening the service door for access.
Battery Access
Guidance on accessing the tractor's battery.
Power Cut-Off Switch
Information on the location and use of the power cut-off switch.
Filling the Fuel Tank
Instructions for refueling the tractor.
Fuel Tank Capacity
Specifies the fuel tank capacity.
Filling the Diesel Exhaust Fluid (DEF)/AdBlue® Tank
Procedures for filling the DEF/AdBlue tank.
Diesel Exhaust Fluid (DEF)/AdBlue® Tank Capacity
Specifies the DEF/AdBlue tank capacity.
Tire and Rim Service
Information on servicing tires and rims.
Tractor Jacking Points
Identifies the correct points for jacking the tractor.
Lubricants and Capacities
Lists recommended lubricants and their capacities for various components.
Engine Oils
Specifics on engine oil types and recommendations.
Consumables - Diesel Fuel
Details on diesel fuel requirements and handling.
Consumables - Biodiesel Fuel
Information regarding the use of biodiesel fuels.
Organic Acid Technology (OAT) Coolant
Guidelines for using OAT coolant.
Electrical Specifications
Technical specifications for the tractor's electrical system.
Battery System
Information about the tractor's battery system.
Auxiliary Battery Connections
Instructions for making auxiliary battery connections.
Engine Hourmeter
Information regarding the engine hourmeter.
Maintenance Planning
Overview of maintenance schedules and planning.
Maintenance Chart
A detailed chart outlining maintenance tasks and intervals.
At Warning Message Display
Guidance on interpreting warning messages displayed on the screen.
Air Cleaner
Maintenance procedures for the air cleaner.
Primary Fuel Filter
Maintenance and replacement of the primary fuel filter.
Fuel Supply Restricted (13L Engines Only)
Specific information on fuel supply restrictions for 13L engines.
Every 10 Hours or Daily
Engine Oil Level
Procedure for checking the engine oil level.
Wheel Bolt Torque
Specification for wheel bolt torque.
Wheel Weight Bolt Torque
Specification for wheel weight bolt torque.
Transmission Oil Level
Procedure for checking the transmission oil level.
Hydraulic and Axle Oil Level
Procedure for checking hydraulic and axle oil levels.
Engine Coolant Level
Procedure for checking the engine coolant level.
Secondary Cooling System Level
Procedure for checking the secondary cooling system level.
Fuel Level
Procedure for checking the fuel level.
Diesel Exhaust Fluid (DEF)/AdBlue® Level
Procedure for checking the DEF/AdBlue level.
General Tractor Inspection
Guidelines for a general inspection of the tractor.
Every 50 Hours
Fuel Tank and Fuel Filter
Maintenance of the fuel tank and fuel filter.
Articulation Hinge - Upper Front
Maintenance of the upper front articulation hinge.
Oscillation Hinge - Rear
Maintenance of the rear oscillation hinge.
Articulation Hinge - Lower
Maintenance of the lower articulation hinge.
Articulation Cylinder - Front, Left-hand, Right-hand
Maintenance of front articulation cylinders.
Articulation Cylinder - Rear, Left-hand and Right-hand
Maintenance of rear articulation cylinders.
Hitch Cylinder Pin - Upper (if equipped)
Maintenance of upper hitch cylinder pin.
Hitch Cylinder Pin - Lower (if equipped)
Maintenance of lower hitch cylinder pin.
Hitch Rockshaft - Left-hand and Right-hand
Maintenance of left and right-hand hitch rockshafts.
Hitch Lift Links and Top Link
Maintenance of hitch lift links and top link.
Driveshaft Carrier Bearing
Maintenance of the driveshaft carrier bearing.
First 100 Hours
Powershift Transmission Filter
Maintenance of the powershift transmission filter.
Powershift Transmission Clutches
Maintenance and inspection of powershift transmission clutches.
CVXDrive™ Transmission Filters
Maintenance of CVXDrive transmission filters.
CVXDrive™ Transmission Clutches
Maintenance and inspection of CVXDrive transmission clutches.
Power Take-Off Clutches on CVXDrive™ Transmission
Maintenance of PTO clutches on CVXDrive transmission.
Engine Fuel Filter
Maintenance and replacement of the engine fuel filter.
Hydraulic Oil Filters
Maintenance and replacement of hydraulic oil filters.
Every 600 Hours
Engine Oil and Filter
Procedure for changing engine oil and oil filter.
Engine Fuel Filter
Procedure for changing the engine fuel filter.
Engine Fuel Pre-filter
Procedure for changing the engine fuel pre-filter.
Fuel Tank Vent
Maintenance of the fuel tank vent.
Cab Air Filter, Outside
Maintenance of the external cab air filter.
Air Tubing - Engine
Inspection and maintenance of engine air tubing.
Alternator - Water Pump Belt
Inspection and maintenance of the alternator and water pump belt.
Power Take Off (PTO) Carrier Bearing
Maintenance of the PTO carrier bearing.
Power Take Off (PTO) Slip Joint
Maintenance of the PTO slip joint.
Radiator and Coolers
Maintenance and cleaning of the radiator and coolers.
Saddle Tanks
Maintenance of saddle tanks.
Cab Recirculation Filter
Maintenance of the cab recirculation filter.
Every 600 Hours or Yearly
Diesel Exhaust Fluid (DEF)/AdBlue® Tank Filter
Maintenance and replacement of the DEF/AdBlue tank filter.
Battery Electrolyte Level
Procedure for checking the battery electrolyte level.
Every 1000 Hours or Yearly
Powershift Transmission Clutches
Maintenance and inspection of powershift transmission clutches.
Every 1200 Hours
Engine Crankcase Breather Filter
Maintenance of the engine crankcase breather filter.
Powershift Transmission Oil and Filter
Procedure for changing powershift transmission oil and filter.
Powershift Transmission Breather
Maintenance of the powershift transmission breather.
CVXDrive™ Transmission Oil and Filters
Procedure for changing CVXDrive transmission oil and filters.
CVXDrive™ Transmission Clutches
Maintenance and inspection of CVXDrive transmission clutches.
CVXDrive™ Transmission Breather
Maintenance of the CVXDrive transmission breather.
Engine Air Filters
Maintenance and replacement of engine air filters.
Diesel Exhaust Fluid (DEF)/AdBlue® Supply Module Filter
Maintenance of the DEF/AdBlue supply module filter.
Door Lock and Hinges
Lubrication and maintenance of door locks and hinges.
Every 1800 Hours
Hydraulic Oil and Filters
Procedure for changing hydraulic oil and filters.
Hydraulic Reservoir Breather
Maintenance of the hydraulic reservoir breather.
Cab Air Filter, Outside
Maintenance of the external cab air filter.
Engine Air Tubing
Inspection and maintenance of engine air tubing.
Every 2400 Hours
Engine Coolant Drain and Flush
Procedure for draining and flushing the engine coolant.
Secondary Cooling System Drain and Flush
Procedure for draining and flushing the secondary cooling system.
Idler and Roller Wheel Oil
Checking and changing oil for idler and roller wheels.
Every 3000 Hours
Engine Valve Adjustment
Procedure for adjusting engine valves.
As Required
Diesel Exhaust Fluid (DEF)/AdBlue® Suction Circuit Filter
Maintenance of the DEF/AdBlue suction circuit filter.
Power Take-Off Clutches on CVXDrive™ Transmission
Maintenance of PTO clutches on CVXDrive transmission.
Vehicle Fire Prevention
Measures and checks for vehicle fire prevention.
Remote Valve Couplers
Inspection and maintenance of remote valve couplers.
Pressure Cooling System Hoses
Inspection of pressure cooling system hoses.
Hydraulic System Hoses
Inspection of hydraulic system hoses.
Tire Pressure
Checking and adjusting tire pressure.
Serpentine Belt
Inspection and replacement of the serpentine belt.
Viscous Fan Drive
Maintenance and inspection of the viscous fan drive.
Track Inspection and Bolt Torque
Procedures for inspecting tracks and checking bolt torque.
Track Tension Release
Procedure for releasing track tension.
Track Alignment
Procedures for checking and adjusting track alignment.
Cab Maintenance
Cab Fabric and Carpet
Cleaning and care of cab fabric and carpet.
Seat Belt
Inspection and maintenance of the seat belt.
Battery Removal and Installation
Step-by-step instructions for battery removal and installation.
Flood and Work Lamps
Maintenance and adjustment of flood and work lamps.
Rotating Beacon Light
Maintenance and operation of the rotating beacon light.
Exterior Step Light
Maintenance of exterior step lights.
Interior Lights
Maintenance and operation of interior lights.
Road Lamps
Maintenance and operation of road lamps.
Front Amber Turn and Position Lamps
Maintenance of front amber turn and position lamps.
Marker/Position Lamp
Maintenance of marker/position lamps.
Rear Amber Turn/Tail/Stop Lamps
Maintenance of rear amber turn/tail/stop lamps.
License Plate Lamp
Maintenance of the license plate lamp.
Fuse and Relay Locations
Component Identification
Identification of fuse and relay components.
Storage
Placing in Storage
Procedures for placing the tractor into storage.
Removing from Storage
Procedures for removing the tractor from storage.
Troubleshooting
Fault Code Resolution
Information on resolving fault codes.
Fault Code Retrieval
Procedures for retrieving fault codes.
Alarm(s)
Explanation of various alarms and display warnings.
Display Warnings
Details on interpreting display warnings.
Powershift Transmission
Troubleshooting specific to the powershift transmission.
Continuously Variable Transmission
Troubleshooting specific to the continuously variable transmission.
Specifications
Engine Specifications
Technical specifications for the tractor's engine.
Power Train and Hydraulics
Specifications related to the power train and hydraulic systems.
Lubricants and Capacities
Lists recommended lubricants and their capacities for various components.
Speed Charts - Powershift Transmission
Speed charts for the powershift transmission.
Speed Charts - CVXDrive™ Transmission
Speed charts for the CVXDrive transmission.
Vehicle Dimensions and Shipping Weight
Specifications for vehicle dimensions and shipping weight.
Maximum Operating Weight
The maximum permissible operating weight of the tractor.
Accessories
Farming System Displays
Information on farming system displays.
Chemical Tank Mounting
Instructions for mounting chemical tanks.
General Accessories
Overview of general accessories available for the tractor.
Forms and Declarations
Advice
General advice and declarations related to the tractor's use and documentation.