Pnp/Pci Configurations - Biostar P4M800 PRO-M7 - BIOS SETUP Bios Setup Manual

P4M800 Pro-M7 BIOS SETUP

7 PnP/PCI Configurations

This section describes configuring the P CI bus system. P CI, or P ersonal Computer
Interconnect, is a system which allows I/O devices to operate at speeds nearing the speed of
the CP U itself uses when communicating with its own special components. This section
covers some very technical items and it is strongly recommended that only experienced
users should make any changes to the default settings.
Figure 7: PnP/PCI Configurations
PNP OS Installed
When set to YES, BIOS will only initialize the PnP cards used for the boot sequence
(VGA, IDE, SCSI). The rest of the cards will be initialized by the PnP operating system
like Window™ 95. When set to NO, BIOS will initialize all the PnP cards. For non-P nP
operating systems (DOS, Netware™ ), this option must set to NO.
The Choices: No (default), Yes.
34