Biostar P4M800 PRO-M7 - BIOS SETUP Bios Setup Manual page 27

P4M800 Pro-M7 BIOS SETUP
OnChip USB Controller
This option should be enabled if your system has a USB installed on the system
board. You will need to disable this feature if you add a higher performance
controller.
The Choices: All Enabled (default), All Disabled, 1&2 USB P ort, 2&3 USB Port,
1&3 USB P ort, 1 USB P ort, 2 USB P ort, 3 USB P ort.
Onchip EHCI Controller
This item allows you to enable or disable the onchip EHCI controller.
The Choices: Enabled (default), Disabled.
USB Emulation
The Choices:
ON (default)
OFF
KB/MS
USB Mouse/Keyboard Support
Enables support for USB attached mouse/keyboard.
The Choices: Enabled (default), Disabled
Super IO Device
P ress Enter to configure the Super I/O Device.
Figure 5.3: Super IO Device
Support USB legacy Keyboard, Mouse and Storage.
Do not support any USB device on Dos.
Support USB legacy Keyboard and Mouse, NO support USB
Storage.
26