Page 2
Any and all information, including, among others, wordings, pictures, graphs are the properties of Hangzhou Hikvision Digital Technology Co., Ltd. or its subsidiaries (hereinafter referred to be "Hikvision"). This user manual (hereinafter referred to be "the Manual") cannot be reproduced, changed, translated, or distributed, partially or wholly, by any means, without the prior written permission of Hikvision.
Page 3
BUSINESS PROFITS, BUSINESS INTERRUPTION, OR LOSS OF DATA OR DOCUMENTATION, IN CONNECTION WITH THE USE OF THIS PRODUCT, EVEN IF HIKVISION HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. REGARDING TO THE PRODUCT WITH INTERNET ACCESS, THE USE OF PRODUCT SHALL BE WHOLLY AT YOUR OWN RISKS.
Page 4
Network Bullet Camera·Quick Start Guide FCC Information Please take attention that changes or modification not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. FCC compliance: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
Page 5
Network Bullet Camera·Quick Start Guide 2. This device must accept any interference received, including interference that may cause undesired operation. EU Conformity Statement This product and - if applicable - the supplied accessories too are marked with "CE" and comply therefore with the applicable harmonized European standards listed under the EMC Directive 2014/30/EU, the RoHS Directive 2011/65/EU.
Page 6
Network Bullet Camera·Quick Start Guide Safety Instruction These instructions are intended to ensure that user can use the product correctly to avoid danger or property loss. The precaution measure is divided into "Warnings" and "Cautions" Warnings: Serious injury or death may occur if any of the warnings are neglected.
Page 7
Network Bullet Camera·Quick Start Guide ● Do not connect several devices to one power adapter as adapter overload may cause over-heating or a fire hazard. ● Please make sure that the plug is firmly connected to the power socket. When the product is mounted on wall or ceiling, the device shall be firmly fixed.
Page 8
Network Bullet Camera·Quick Start Guide gently. If the camera will not be used for an extended period, please replace the lens cap to protect the sensor from dirt. ● Do not aim the camera at the sun or extra bright places. Blooming or smearing may occur otherwise (which is not a malfunction), and affect the endurance of sensor at the same time.
Page 9
Network Bullet Camera·Quick Start Guide ● CAUTION: Risk of explosion if the battery is replaced by an incorrect type. Dispose of used batteries according to the instructions ATTENTION: IL Y A RISQUE D'EXPLOSION SI LA BATTERIE EST REMPLACÉE PAR UNE BATTERIE DE TYPE INCORRECT. METTRE AU REBUT LES BATTERIES USAGÉES CONFORMÉMENT AUX INSTRUCTIONS ●...
Network Bullet Camera·Quick Start Guide 1 Appearance Description Type I: Type I Bullet Camera Overview Description Description Lens Front Cover Back Cover Fix Ring Power Cord Network Cable...
Page 12
Network Bullet Camera·Quick Start Guide Type II: Type II Bullet Camera Overview Description Description Lens Front Cover Back Cover Mounting Base Power Cord Network Cable...
Page 13
Network Bullet Camera·Quick Start Guide Type III: Type III Bullet Camera Overview Description Description Lens Front Cover Memory Card Slot Cover Back Cover Mounting Base Power Cord Network Cable...
Page 14
Network Bullet Camera·Quick Start Guide Type IV: Bullet Camera Overview Description Description Lens Main Body Bracket Power Cord Network Cable...
Page 15
Network Bullet Camera·Quick Start Guide Type V: Bullet Camera Overview Description Description Lens Main Body Bracket Power Cord Network Cable Note: For cameras support power over Ethernet (PoE), the power is passed along with data on Ethernet cabling. And a switch supports PoE function is required.
Network Bullet Camera·Quick Start Guide 2 Installation Before you start: ● Make sure the device in the package is in good condition and all the assembly parts are included. ● The standard power supply is PoE or 12 VDC, please make sure your power supply matches with your camera.
Network Bullet Camera·Quick Start Guide Unscrew the Cover and Insert Memory Card 2. Insert the memory card into the memory card slot. 3. (Optional) To unmount the memory card, push to get it ejected. 4. Screw the cover back to the camera. Ceiling Mounting Before you start: Both wall mounting and ceiling mounting are suitable for the bullet...
Page 18
Network Bullet Camera·Quick Start Guide Note: Drill the cable hole, if adopting ceiling outlet to route the cable. Figure 2-2 The Drill Template 3. Route the cables through the cable hole (optional), or the side opening. 4. Fix the camera on the ceiling/wall with supplied screws. Figure 2-3 Fix the Camera on the Ceiling/Wall...
Page 19
Network Bullet Camera·Quick Start Guide Note: In the supplied screw package, both self-tapping screws, and expansion bolts are contained. If the ceiling is cement, expansion bolts are required to fix the camera. If the ceiling is wooden, self-tapping screws are required. 5.
Network Bullet Camera·Quick Start Guide P: 0° to 360° R: 0° to 360° T: -90° to 90° Figure 2-4 3-aix Adjustment 7. (Optional) Install the waterproof jacket. Refer to 2.4 Install Network Cable Waterproof Jacket for details. Mounting with Junction Box Before you start: Both wall mounting and ceiling mounting are suitable for the bullet ...
Page 21
Network Bullet Camera·Quick Start Guide Note: Drill the cable hole, if adopting ceiling outlet to route the cable. Ø 84 (3.3") Screw Hole Ø 55 (2.2") 3-Ø 4 (0.2") Ø 40 (1.6") Ø 70 (2.8") Unit: mm (inch) Figure 2-5 The Drill Template 3.
Page 22
Network Bullet Camera·Quick Start Guide Figure 2-7 Fix the Junction Box on the Wall 6. Route the cables through the cable hole. Here we take bottom cable hole as the example to describe the installation. 1). Separate the waterproof cover and the cable gland from the junction box.
Network Bullet Camera·Quick Start Guide Figure 2-8 Combine the Cover of Junction Box with its Body 8. Repeat steps 4 to 6 of 2.2 Ceiling Mounting to complete the installation. Install Network Cable Waterproof Jacket If the camera is installed outdoor, you should use the waterproof accessory to waterproof the network cable.
Page 24
Network Bullet Camera·Quick Start Guide 2. Fix ② on the network cable between ① and ③. 3. Place ⑤ onto the end of ⑥, and plug the RJ45 male connector into RJ45 female connector. 4. Screw ③ to ⑥ clockwise. 5.
Network Bullet Camera·Quick Start Guide 3 Activate and Access Network Camera Scan the QR code to get Activate and Visit Network Camera. Note that mobile data charges may apply if Wi-Fi is unavailable.
Need help?
Do you have a question about the HiLook IPC-B129H and is the answer not in the manual?
Questions and answers