Specifications; Mx-1400 Dsp - American Audio MX-1400 DSP User Manual And Reference Manual

MX-1400 DSP

Model: MX-1400 DSP 4 Channel Mixer
poWer suppLY:
diMensions:
WeiGht:
crossFader:
poWer consuMption:
headphone iMpedance:
operatinG teMperature:
input/Output impedance & Sensitivity: (Eq Flat, Maximum gain, FX Off, Load = 100k OhM)
Line:
auX:
phono:
Mic:
rec:
Master unbaL.:
Master XLr (load=600 ohM):
booth (load=600 ohM):
diGitaL out (load=75 ohM):
phones (load=32 ohM):
Maximum input: (1khz Input, Master Output ThD=1%, Eq Flat, FX Off, Maximum gain)
Line, auX:
phono:
Mic:
Maximum Output: (Eq Flat, Maximum gain, FX Off, ThD=1%)
Master:
rec:
phones: (LOAD=32 ohms)
Output Noise: (Maximum gain, Eq Flat, W/20khz LPF, A-Weighted, FX OFF)
Line, auX:
phono:
Mic:
channeL baLance:
Frequency response: (Eq Flat, Maximum gain, FX Off)
Line/auX:
phono:
Microphone:
ThD - Total harmonic Distortion: (Eq Flat, Maximum gain, FX Off, W/ 20khz LPF):
Line, auX:
phono:
Mic:
cross taLk:
Line, auX, phono:
©
AC 115v~60hz/230v~50hz, User Selectable
Single Voltage:
AC 100V, 50/60hz (Japan);
AC 120V, 60hz (U.S.A. and Canada);
AC 220V, 50hz (Chile and Argentina);
AC 220V, 60hz (Philippines and korea)
AC 230V, 50hz (Europe, U.k., New Zealand, South Africa, and Singapore)
American Audio - www.americanaudio.us - MX-1400 DSP Instruction Manual Page 24
®
320mm (W) x 357mm (D) x 106mm (h)
12.6" (W) x 14" (D) x 4.17" (h)
13.8 Lbs. / 6.3 kgs.
Feather Fader Plus - VCA detecting fader start control -
Low grounding impedance crossfader
33W
16 Ohms
5 to 35 deg. C; humidity: 25 to 85% Rh
(non-condensing); Storage Temperature: -20 to 60 deg. C
20k OhM / -14dbV +/-0.1db (200mV)
47k OhM / -14dbV +/-0.1db (200mV)
47k OhM / -54dbV +/-0.1db (2mV)
10k OhM / -54dbV +/-0.1db (2mV)
1k OhM / -10dbV (316mV) +/-2db
1k OhM / 0dbV (1V) +/-2db
600 OhM / +4dbm (1.23V) +/-2db
600 OhM / +4dbm (1.23V) +/-2db
75 OhM / -16dbfs +/-2db, 0.5 +/-0.1V P-P
33 OhM / 0dbV (1V) +/-2db (Cue Mixing at center)
MORE ThAN +4dbV
MORE ThAN -36dbV
MORE ThAN -36dbV
MORE ThAN +18dbV (8.0V)
MORE ThAN +8dbV (2.5V)
MORE ThAN +3dbV (1.4V)
MORE ThAN 80db
MORE ThAN 66db
MORE ThAN 64db
WIThIN 3db
20 - 20khz +/-2db
20 - 20khz +2 /-3db (RIAA)
20 - 20khz +2 /-3db
LESS ThAN 0.04% 20 - 20khz
LESS ThAN 0.15% @ 1khz (A-Weighted)
LESS ThAN 0.15% @ 1khz (A-Weighted)
Maximum gain, Eq Flat, Master Output)
More Than 65db @ 1khz between L and R, and Channels
More Than 70db @ 1khz between Channels

SPECiFiCaTiONS

AC 110V, 60hz (Colombia)
AC 127V, 60hz (Mexico)
AC 240V, 50hz (Australia)