American Audio MX-1400 DSP User Manual And Reference Manual page 17

MX-1400 DSP CONTROLS aND FUNCTiONS cont.
wil range from 0v ~ 9v. This function may be used to limit the maximum siganl output level.
58. ac connection - This connector is used to supply main power to the unit via the included
detachable power cord. The power connection uses an I.E.C. type connector, use only the supplied,
polarized AC power cord. Use only a power cord that matches this type of connection. be sure to
only connect this unit to a power outlet that matches the printed power label on the unit. Never use
a power cord when the ground prong has been removed or broken off. The ground prong is used to
reduce the risk of electrical shock in case of an electrical short. This cord is designed to fit in one
direction only. Do not attempt to force a cord if it does not fit, be sure the cord is being inserted
properly.
59. ac voLtaGe seLector - This switch is used to change the operating voltage. Operating
voltage can be toggled between 115v or 230v/50~60hz. be sure the selector is set to the proper
voltage for your area before attempting to operate the unit. Always be sure main power is shut off
before change the position of the Voltage Selector Switch.
*dual voltage Models only
American Audio - www.americanaudio.us - MX-1400 DSP Instruction Manual Page 17
© ®