American Audio MX-1400 DSP User Manual And Reference Manual page 12

MX-1400 DSP
however, master volume is controlled by the master volume Control (14).
31. channeL voLuMe Fader - These faders are used to control the output signal of any source
assigned to its particular channel. however, master volume is controlled by the master volume
Control (14).
32. Fader assiGn sWitch - This switch assigns a channel to the Crossfader (21). When a
channel is assigned to the left side of the Crossfader (21) that channels output level is routed to
and controlled by the Crossfader (21). Sliding the Crossfader (21) to left position will send the
volume output of the assigned channel to the master volume level (14), siding the Crossfader
(21) to right position will cut that channels volume to master volume level (14). The reverse is
true for the right channel fader assign switch. When the assign switch is set to the "OFF" position the
crossfader will have no function.
33. Mic 1 on/oFF button - This switches MIC 1 On and Off.
Mic 2 on/oFF button - This switches MIC 2 On and Off.
34. MiCROPhONE 2 TREbLE CONTROL - This knob is used to adjust the treble levels of the
Microphone with a maximum signal gain of 12db or maximum signal decrease of -12db. Turning the
knob in a counter-clockwise direction will decrease the amount of treble applied to the microphone
signal, turning the knob in a clockwise direction will increase the amount of treble applied to micro-
phone signal.
MiCROPhONE 2 MiDRaNGE CONTROL - This knob is used to adjust the midrange levels of a
channel allowing for a maximum midrange gain of 12db or maximum decrease of -12db. Turning the
knob in a counter-clockwise direction will decrease the amount of midrange applied to a channel
signal, turning the knob in a clockwise direction will increase the amount of midrange applied to a
channel signal.
MiCROPhONE 2 baSS CONTROL - This knob is used to adjust the low frequency levels of the
microphone with a maximum signal gain of 12db or maximum signal decrease of -12db. Turning the
knob in a counter-clockwise direction will decrease the amount of bass applied to the microphone
signal, turning the knob in a clockwise direction will increase the amount of bass applied to micro-
phone signal.
35. MiCROPhONE 1 TREbLE CONTROL - This knob is used to adjust the treble levels of the
Microphone with a maximum signal gain of 12db or maximum signal decrease of -12db. Turning the
knob in a counter-clockwise direction will decrease the amount of treble applied to the microphone
signal, turning the knob in a clockwise direction will increase the amount of treble applied to micro-
phone signal.
MiCROPhONE 1 MiDRaNGE CONTROL - This knob is used to adjust the midrange levels of a
channel allowing for a maximum midrange gain of 12db or maximum decrease of -12db. Turning the
knob in a counter-clockwise direction will decrease the amount of midrange applied to a channel
signal, turning the knob in a clockwise direction will increase the amount of midrange applied to a
channel signal.
MiCROPhONE 1 baSS CONTROL - This knob is used to adjust the low frequency levels of the
microphone with a maximum signal gain of 12db or maximum signal decrease of -12db. Turning the
knob in a counter-clockwise direction will decrease the amount of bass applied to the microphone
signal, turning the knob in a clockwise direction will increase the amount of bass applied to micro-
©
American Audio - www.americanaudio.us - MX-1400 DSP Instruction Manual Page 12
®
CONTROLS aND FUNCTiONS cont.