Specifications; Q-D1 Pro - American Audio Q-D1 PRO User Instructions

Q-D1 PRO

Technical Specifications - Model: Q-d1 Pro, 2 Channel audio Mixer.
POWER SUPPLy:
DIMENSIONS:
WEIGhT:
CROSSFaDER:
POWER CONSUMPTION:
hEaDPhONE IMPEDaNCE:
ENVIRONMENTaL CONDITION:
input/Output impedance & sensitivity (Level/impedence): (Master set to 0dBV output,
Load=100k OhM, maximum gain)
LINE:
PhONO:
MIC:
REC:
PhONES:
MaSTER 1/4":
Maximum input (1kHz, Master Output tHD=0.5%, eQ falt, Maximum Gain)
LINE:
PhONO:
MIC:
Maximum Output (tHD=1%, Maximum Gain, eQ at center position)
MaSTER (RCa):
PhONES:
cHaNNeL baLaNce:
Output Noise (Maximum Gain, EQ flat, W/20KHz LPF, A-Weighted)
LINE:
PhONO:
MIC:
USB:
Frequency response (Master=0dbv output, Maximum Gain, eQ Flat)
LINE:
PhONO:
MIC:
crOss taLk:
LiNe:
channel equalizer:
TREBLE:
BaSS:
Fader Maximum attenuation
Channel Fader:
Crossfader
American Audio - www.AmericanAudio.us - Q-D1 PRO Instruction Manual Page 17
© ®
AC 9v/1000mA.
219(W) * 255(D) * 100(H) mm
4.62 Lbs./2.1 Kgs
Low Residue Resistanced Crossfader.
13.5W w/full headphone output
32 Ohms
Operating Temperature 5 to 35 deg. C
Humidity 25 to 85% RH (non-condensing)
10K OHM /-14dBV (200mV) +/-2dB
47K OHM /-50dBV (3.16mV) +/-2dB
2.2K OHM /-60dBV (1mV) +/-2dB
1K OHM /-10dBV (316mV) +/-2dB
33 OHM /-3dBV (707mV) +/-2dB
600 OHM /+dBV (2V) +/-2dB
More than +4dBV
More than -32dBV
More than -42dBV
MORE THAN +18dBV (8.0V) at Load=100K OHM
MORE THAN +4dBV (1.6V) at Load=32 OHM
Within 3dB
LESS THAN -90dBV
LESS THAN -70dBV
LESS THAN -60dBV
LESS THAN -70dBV
20-20KHz +/-1dB
20-20KHz +1/-1.5dB (RIAA)
20-20KHz +1/-2dB
More than 65dB @1Khz between left and right channels
More than 70dB @1KHz between channels
12+/-2dB at 10KHz
-19+/-3dB at 10KHz
12+/-2dB at 100Hz
-26+/-3dB at 100Hz
More than 80dB at 1KHz
More than 80dB at 1KHz

SPECIFICaTIONS