Download Print this page

Advertisement

Quick Links

Installation and Operation instructions
ZNO2056200 C
RoundTech MR SEO
(Medium Recessed Safety Escape Route and Open Area)
200 mm
The device shall only be used for its intended prupose and in undamaged and flawless condition.
Only genuine Eaton spare parts may be used for replacement and repair.
Observe the national safety rules and regulations to prevent accidents as well as the safety instructions included in these leaflet.
1
0 V
04/2021
110 mm
90x15mm
64 < Ø < 78 mm
Hole saw
Before use
24h
1 -> 30 mm
105<->200mm
05

Advertisement

loading
Need help?

Need help?

Do you have a question about the RT2RSEO200ATF1H and is the answer not in the manual?

Questions and answers

Summarization of Contents

Installation and Operation Instructions
Product Overview and Dimensions
Presents the RoundTech MR SEO luminaire and its key physical dimensions.
Installation Site Preparation
Details required tools and dimensions for ceiling cutout.
Assembly and Configuration Options
Luminaire Assembly Steps
Illustrates the sequential steps for assembling the luminaire components.
Connection Terminals and Model Overview
Shows terminal blocks and compares Standalone, AutoTest, and CGLine+ models.
Standalone Mode Configuration
Explains settings for non-maintained and maintained modes in Standalone.
Advanced System Configurations
Autotest System Configuration
Details the configuration for Autotest mode, including eFocus settings.
CGLine+ System Configuration
Explains configuration for CGLine+ mode, including eFocus settings.
Installation Details: Cable and Date
Covers cable diameter considerations and recording the installation date.
eFocus Application Settings
Escape Route eFocus Setup
Configures eFocus for optimal performance in escape route lighting (1Lx).
Open Area eFocus Setup
Configures eFocus for optimal performance in open area lighting (0.5Lx).
Installation and Operational Status
Luminaire Installation and Closure
Demonstrates closing the luminaire cover and mounting it into the ceiling.
Status Indicators and Battery Behavior
Explains LED indicators and battery/lamp charge status.
Testing and Maintenance
Magnet Test Procedures
Details functional, duration, reset tests, and dim level adjustment using a magnet.
Luminaire Maintenance and Battery Replacement
Guides on replacing the battery and general luminaire maintenance.
Product Specifications and Variants
Technical Specifications Table
Lists product variants with IP ratings, duration, battery, and LED details.
Battery Packs and Component Notes
Provides order codes for battery packs and notes on non-replaceable parts.