Security; Executing Transfers; Selecting Transfer Mode; Selecting The Source Disk - ACRONIS TRUE IMAGE 9.1 - FOR LINUX User Manual

On program screens, damaged partitions are marked with a red circle with a white cross inside in the
upper left corner. Before you start cloning, you should check such disks for errors using corresponding
OS tools.
13.2

Security

Note the following: if the power goes out or you accidentally press RESET during the
transfer, the procedure will be incomplete and you will have to partition and format or clone
the hard disk again.
No data will be lost because the original disk is only being read (no partitions are changed or
resized) until data transfer is completed.
Nevertheless, we don't recommend that you delete data from the old disk until you are sure
it is correctly transferred to the new disk, the server boots up from new disk, and all
applications work.
13.3

Executing transfers

13.3.1

Selecting transfer mode

You will see the Select transfer mode window just after the welcome window.
We recommend using automatic mode as it is suitable for most cases. The manual mode can
be helpful if you need to change disk partition layout.
If the program finds two disks, one partitioned and another unpartitioned, it will automatically
recognize the source and destination, so the next two steps will be bypassed.
13.3.2

Selecting the source disk

If the program finds several partitioned disks, it will ask you what is the source (i.e. the
older data disk).
Copyright © Acronis, Inc., 2000-2007
Transfer mode selection
Transferring the system to a new disk
79