ACRONIS TRUE IMAGE 9.1 - FOR LINUX User Manual page 72

Console mode
Unmounts the device mounted at mountpoint, destroys kernel space block device and
stops user space daemon.
-s|--stop pid
Destroys kernel space block device and stops user space daemon specified by pid. This
command should be used if an error occurs while mounting and unmounted user space
daemon/kernel space block device pair survives. Such a pair is listed by -l|--list
command with none in mountpoint field.
-o|--loop
A test command. Mounts a file, specified in -f|--filename option, containing valid Linux
filesystem, as if it is Acronis True Image archive. The command may be used, for example,
to estimate an image compression level, by comparing the time, necessary for copying a file
from the image, with the time for copying the mounted (non-compressed) file.
Trueimagemnt supports the following command options:
-f|--filename archive filename
The image file name. trueimagemnt transparently supports NFS and Samba network
access. To access a NFS network drive, specify the image file name as follows:
nfs://hostname/share name:/remote filename
For example:
trueimagemnt -m /mnt/md1 -f nfs://dhcp6-
223.acronis.com/sdb3/nfs_root:/mike/md1.tib -i 2
mounts /mike/md1.tib archive, located on dhcp6-223.acronis.com node in /sdb3/nfs_root
directory exported by NFS.
To get Samba network access, specify the image file name as follows:
smb://hostname/share name/remote filename
Hostname may be specified with username and password as:
username:password@hostname
For example:
trueimagemnt -m /mnt/md1 -f smb://dhcp6-
223.acronis.com/sdb3/mike/md1.tib -i 2
mounts /mike/md1.tib archive, located on dhcp6-223.acronis.com node in /sdb3 directory
exported by Samba.
-p|--password password
Specifies the password to explore password protected images.
-t|--fstype filesystem type
72 Copyright © Acronis, Inc., 2000-2007