ACRONIS TRUE IMAGE 9.1 - FOR LINUX User Manual page 69

restore_security:[on | off]
original_date:[on | off]
list
filename:[filename]
asz_create
harddisk:X
partition:[partition
number]
size:[ASZ size in sectors]
asz_activate
asz_activate
password:[password]
asz_delete
partition:[partition
number]
clone
harddisk:[disk number]
target_harddisk:[disk
number]
Copyright © Acronis, Inc., 2000-2007
whether it be in the archive or on the disk.
never – this will give the file on the hard disk unconditional priority over
the archived file.
always – this will give the archived file unconditional priority over the
file on the hard disk.
If not specified, the files on the disk will always be replaced with the
archived files.
Specifies whether to restore files' security attributes (default) or the files
will inherit the security settings of the folder where they will be restored.
Specifies whether to restore files' original date and time from the archive
or assign the current date and time to the restored files. If not specified,
the current date is assigned.
With this option, the image contents is displayed.
When listing image contents, partition numbers may not coincide with
those in the drives/partitions list, if the image does not contain all the
disk partitions. For example, if the image contains partitions 2-3 and 2-5,
they will be listed as 2-1 and 2-2.
If the --deploy --partition command cannot find a partition in the
image by its physical number, use --partition:<number in the
image> --target_partition:<physical number of the
target partition> keys. For the above example, to restore partition
2-5 to its original place use:
--partition:2-2 --target partition:2-5.
Specifies the hard disk number where the Acronis Secure Zone will be
created.
Specifies partitions from which free space will be taken for Acronis Secure
Zone.
Sets the Acronis Secure Zone size (in sectors). If not specified, is set as
an average between the maximal (using unallocated space and free
space on all the listed partitions) and minimal values.
Activates the Acronis Startup Recovery Manager. The option will not take
effect if the system partition is resized during Acronis Secure Zone
creation. In that case, use the separate asz_activate command.
Sets a password for the Acronis Secure Zone.
Specifies partitions to which free space will be added after the Acronis
Secure Zone is deleted. If you specify several partitions, the space will be
distributed proportionally to each partition's size.
Specifies a source hard disk which will be cloned to the new hard disk.
Specifies the target hard disk number where the source hard disk will be
cloned.
Console mode
69