ACRONIS TRUE IMAGE 9.1 - FOR LINUX User Manual page 66

Console mode
asz:[number of archive]
index:N
N = Number of the backup in an archive:
1 = basic full backup
2 = 1st increment... and so on
0 (default) = latest increment
Backup options
incremental
differential
compression:[0...9]
split:[size in MB]
General options
oss_numbers
log:[filename]
* To access a NFS network drive, specify the image file name as follows:
nfs://hostname/share name:/remote filename
For example:
trueimagecmd --list --filename:nfs://dhcp6-
223.acronis.com/sdb3/nfs_root:/mike/md1.tib
shows contents
223.acronis.com node in /sdb3/nfs_root directory exported by NFS.
66
Addresses to Acronis Secure Zone and
selects the archive (a full backup with or
without increments). To get the archive
number, use /asz_content
Select a backup in a sequence of
incremental backups inside the archive.
To get a backup index from ASZ, use
/asz_content
Set the backup type to incremental. If
not specified or there is no basic full
backup, a full backup will be created
Set the backup type to differential. If not
specified or there is no basic full backup,
a full backup will be created
Specify the data compression level. It
ranges from 0 to 9 and is set to 3 by
default
Split the backup into parts of the
specified size
Declares that numbers of partitions in
the partition option are adjusted for
MBR partition table rather than be simple
ascending numbers. This means that
primary partitions have numbers 1-1, 1-
2, 1-3 (and 1-4 if there are not logical
partitions on the disk) and logical
partitions numbers start with 1-4. For
example, if the disk has one primary and
two logical partitions, their numbers can
appear as follows:
--partition:1-1,1-2,1-3 or
--oss_numbers --partition:1-
1,1-4,1-5
Create a log file of the current operation
with the specified file name
of /mike/md1.tib archive. /mike/md1.tib is located
Copyright © Acronis, Inc., 2000-2007
ASZ
Any
Any
Any
Any
Other than ASZ
Any
Any
on dhcp6-