Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Hyster H10.00XL
Summarization of Contents
INTRODUCTION
How to Move a Disabled Lift Truck
Procedures and safety advice for moving a disabled lift truck.
How to Tow the Lift Truck
Detailed steps for towing a disabled lift truck safely.
Lift Truck Blocking and Raising Procedures
How to Put a Lift Truck on Blocks
Guidelines for safely blocking a lift truck for maintenance.
How to Raise Tires
Steps to safely lift and support lift truck tires.
Maintenance Procedures
Daily Checks
Daily checks and maintenance tasks for the lift truck.
Checks with Engine Stopped
Procedures for checks with the engine off.
Tires and Wheels Inspection
Inspection and maintenance of tires and wheels.
Fork Maintenance and Adjustment
Fork Removal and Installation
Safety warnings and steps for removing and installing forklift forks.
Inspection of Forks, Mast, and Lift Chains
Safety Labels
Importance and procedure for installing safety labels.
Operator and System Checks
Operator Restraint System
Checking the seat belt, seat rails, and mounting.
Cooling System Checks
Instructions for checking coolant level and radiator fins.
Leak Checks
Visual checks for leaks in fuel, oil, and coolant systems.
Hydraulic and Engine Oil Checks
Hydraulic System Checks
Checking hydraulic oil level and system for leaks.
Engine Oil Level Check
Procedures for checking engine oil level and using the correct oil.
Filter and Air System Maintenance
Fuel Filter and Battery Maintenance
Draining fuel filter and battery safety/maintenance.
Air Filter System Maintenance
Cleaning pre-cleaner and air filter element.
Checks with Engine Running
Checks to perform while the engine is running.
Operational System Checks
Control Levers, Pedals, and Transmission
Checking controls, pedals, and transmission oil level.
Lift System Operation
Procedures for operating the lift mechanism safely.
Brake and Steering System Checks
Checking brake and steering system operation.
150 Hours or Monthly Maintenance
Lift Chains Lubrication and Adjustment
Lubricating and adjusting lift chains.
Air Tanks and Drive Shaft Maintenance
Draining air tanks and lubricating drive shaft.
Axle, Breather, and Filter Maintenance
Steering Axle and Wheel Nuts
Lubricating steering axle and checking wheel nuts.
Drive Axle, Breather, and Air Filter
Checking drive axle, cleaning breather, and air filter maintenance.
350 Hours or Two Months Maintenance
Engine Oil, Filter, and Drive Belts
Changing engine oil/filter and checking drive belts.
Brake System Maintenance
Checking brake actuator arms and related systems.
Component Maintenance and Checks
Empty Container Attachment Maintenance
Lubrication and draining for empty container attachment.
General Lubrication
Lubricating hinges, pins, linkages, cables, pedals, and levers.
Fork Wear and Damage Check
Inspecting forks for wear, damage, and thickness.
Lift Chain Wear Check
Checking lift chains for wear and comparing to wear limits.
Fuel System
Idle Speed Adjustment
Adjusting the engine idle speed.
Governor Speed Adjustment (Diesel)
Adjusting governor speed for diesel engines.
Need help?
Do you have a question about the H10.00XL and is the answer not in the manual?
Questions and answers