Related Manuals for Metallkraft GS 1200-24 E
Summarization of Contents
1 Introduction
1.1 Copyright
Explains copyright protection for the manual content.
1.2 Customer Service
Provides contact information for technical support and spare parts.
1.3 Limitation of Liability
Outlines conditions for manufacturer's liability exclusion.
2 Safety
2.1 Symbol Explanation
Explains safety symbols and signal words used in the manual.
2.2 Obligations of the Operating Company
Details the responsibilities of the company operating the machine.
2.3 Personnel Requirements
Defines necessary qualifications and roles for safe machine operation.
2.4 Personal Protective Equipment
Lists and describes essential personal protective equipment (PPE) for users.
2.5 Safety Labels on the Thread Tapping Machine
Explains the importance and meaning of safety labels affixed to the machine.
2.6 Safety Devices
Emphasizes the critical role of safety devices and their proper functioning.
2.8 Special Safety Rules for the Thread Tapping Machine
Provides specific safety instructions for operating the thread tapping machine.
3 Intended Use
3.1 Reasonably Foreseeable Misuse
Describes misuse and potential hazards associated with the machine.
3.2 Residual Risks
Lists inherent risks remaining even when safety instructions are followed.
4 Technical Data
4.1 Table
Presents detailed technical specifications for different machine models.
5 Transport, Packaging, Storage
5.1 Delivery
Instructions for checking the machine upon delivery for damage or missing parts.
5.2 Transport
Safety precautions and methods for transporting the machine safely.
5.4 Storage
Recommendations for storing the tapping machine in a suitable environment.
6 Description of Device
6.1 Representation
Illustrates main components of the thread tapping machine for basic understanding.
Accessories (Not Included)
Lists optional accessories available for the threading machines.
7 Assembly
7.1 Setting the Tapping Direction
Explains how to adjust the machine for vertical or horizontal tapping.
7.2 Electrical Connection
Provides instructions and safety warnings for connecting the machine to power.
8 Operation
8.1 Operation
Details how to switch on and use manual/automatic operating modes.
Quick-Change Thread Tapping Spindle
Describes inserting and removing tapping spindle collets.
8.2 Turn On/Off
Instructions for powering the machine on and off.
8.3 User Interface
Explains control panel functions and settings.
Automatic mode
Describes setting parameters and operating in automatic mode.
8.4 Language Settings
Guide on how to change the display language of the machine.
8.5 Deep Hole Operation
Explains settings and procedures for deep hole tapping.
8.6 Storage and Recall of Workpiece Parameters
How to save and load machine settings for specific workpieces.
8.7 User Parameter
Details advanced user parameters for customizing machine behavior.
8.8 User Parameter for Lubricating and Scrap Blowing
Explains settings for automatic lubrication and chip blowing.
8.9 Adjusting the Coupling Torque of the Collet Chuck
How to adjust the collet chuck torque for proper operation.
9 Cleaning, Maintenance and Repair
9.1 Cleaning and Maintenance
Provides instructions for routine cleaning and maintenance.
9.2 Overhaul of the Fuse
Steps to check and replace the fuse if the machine fails to start.
9.3 Repair
Guidance on proceeding with repairs and contacting customer service.
10 Disposal, Recycling of Old Equipment
10.1 Decommission
Procedures for safely taking the machine out of service for disposal.
10.2 Disposal of Electrical Equipment
Guidelines for environmentally sound disposal of electrical components.
10.3 Disposal via Municipal Collection Points
Information on disposing of the machine through local collection services.
10.4 Disposal of Lubricants
Advice on proper disposal methods for used lubricants.
12 Spare Parts
12.1 Ordering Spare Parts
Details necessary information for ordering spare parts.
12.2 Spare Parts Drawing 1
Illustrates machine components for identifying spare parts (drawing 1).
Spare Parts Drawing 2
Illustrates machine components for identifying spare parts (drawing 2).
Need help?
Do you have a question about the GS 1200-24 E and is the answer not in the manual?
Questions and answers