Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Metallkraft AS 1601
Summary of Contents for Metallkraft AS 1601
- Page 1 Operating Instructions Extraction unit AS 1601 AS 1601...
-
Page 2: Table Of Contents
Stürmer Maschinen GmbH.Passing on as well as copying of this document, the use and distribution of its content are prohibited if not explicitly permitted. Contraventions are liable to compensation. Subject to technical modifications and error. AS 1601 | Version 2.01... -
Page 3: Introduction
AS 1601 | Version 2.01... -
Page 4: Obligations Of The Operating Company
The qualifications of the personnel for the different tasks alyse hazards resulting from the special working are mentioned below: conditions at the place of use of the extraction unit. AS 1601 | Version 2.01... -
Page 5: Personal Protective Equipment
Do not allow other persons, especially children, to touch the ex- traction unit. Protective clothes Protective clothes are made of a tightly fitted fabric without the protruding parts of low tear strength. AS 1601 | Version 2.01... -
Page 6: Safety Signs On The Extraction Unit
Immediately replace them. Decommission the machine if the security symbols can- not be recognised nor understood at the first glance, un- til the new security symbols are applied. AS 1601 | Version 2.01... -
Page 7: Technical Data
Transport, packing, storage 5.1 Delivery Check the extraction unit on delivery for any visible trans- Fig. 2: Gerätebeschreibung AS 1601 portation damage. If you notice any damage to the device please report this immediately to the carrier or dealer. A Motor B Connector 5.2 Packaging... -
Page 8: Montage And Start-Up
Step 4: After finishing the work, first switch off the metal- working machine, then the extraction unit Step 5: Empty the collection container and check the fil- ter. Replace the filter if necessary. AS 1601 | Version 2.01... -
Page 9: Care, Maintenance And Repair
Always use original spare parts when required. Half-yearly: Check electrical safety devices and pro- tective devices. Under no circumstances may the device be modi- fied without permission. AS 1601 | Version 2.01... -
Page 10: Troubles Table
You contributes to that these components are disposed of separately and properly. In case of doubt, please contact your municipal waste disposal. As necessary, a specialized waste disposal company can help be used for the treatment. AS 1601 | Version 2.01... -
Page 11: Spare Parts
The item No. of your machine: 11.1 Ordering spare parts Extraction unit AS 1601: 3922006 The spare parts may be purchased with the authorised dealer or directly with the manufacturer. Please find the corresponding contact data in Chapter 1.2 Customer... -
Page 12: Spare Parts Drawing
In case of service, the following drawing shall help to identify the necessary spare parts. If necessary, send a copy of the parts drawing with the marked components to your authorised dealer. Fig. 3: Spare parts AS 1601 AS 1601 | Version 2.01... -
Page 13: Spare Parts List
0392200613 Spacer ring 0392200614 Fan impeller 0392200615 Hex bolt M8x30 0392200616 Washer 8 mm 0392200617 Upper cover 0392200618 Screw M6x20 0392200619 Motor 0392200620 Flange nut M8 0392200621 Switch 0392200622 Hose clamp 0392200623 Filter bag 0392200624 AS 1601 | Version 2.01... -
Page 14: Electrical Wiring Diagram
Electrical wiring diagram 12 Electrical wiring diagram Fig. 4: Electrical wiring diagram AS 1601 AS 1601 | Version 2.01... -
Page 15: Ec Declaration Of Conformity
DIN EN 60204-1:2007-06 DIN EN 60204-1:2007-06Safety of machinery. Electrical equipment of machines. Specification for general requirements Kilian Stürmer, Stürmer Maschinen GmbH, Responsible for documentation: Dr.-Robert-Pfleger-Str. 26, D-96103 Hallstadt Hallstadt, 07 September 2018 ______________________ Kilian Stürmer CEO, Director AS 1601 | Version 2.01... - Page 16 www.metallkraft.de...
Need help?
Do you have a question about the AS 1601 and is the answer not in the manual?
Questions and answers