CalderaSpas Paradise Series Martinique Pre-Delivery Instructions

CalderaSpas Paradise Series Martinique Pre-Delivery Instructions

Advertisement

Utopia/Paradise Series
Pre-Delivery Instructions
Please take the time to read this booklet carefully, as it will provide you with the information you will need to ensure
the safe, secure, and timely installation of your new spa. The following sections are guidelines on how to prepare for
delivery and set-up of your new spa. Specifically covered are site selection, delivery access, ground preparation, and
electrical requirements.
Remember to carefully read the Owner's Manual that accompanies your spa and to complete the warranty card
within ten days of delivery. These items, along with other valuable information, are included in the Owner's Packet
which can be located in the equipment compartment of your spa. You will also find your serial number in the
equipment compartment.
Watkins Manufacturing Corporation reserves the right to change features, specifications, and design without
notification and without incurring any obligation.
DATE PURCHASED: _________________________________________________________________
DATE INSTALLED: ___________________________________________________________________
DEALER: ___________________________________________________________________________
ADDRESS: __________________________________________________________________________
TELEPHONE: _______________________________________________________________________
In most cities and counties, permits will be required for the installation of electrical circuits or the construction of
exterior surfaces (decks and spa enclosures). In addition, some communities have adopted residential barrier codes
which may require fencing and/or self-closing gates on the property to prevent unsupervised access to a pool (or
spa) by children under 5 years of age. Your Caldera
F1346-91 Standard for Safety Covers, and as a result, is usually exempt from most barrier requirements. As a
general practice, your local Building Department will inform you of any applicable barrier requirements at the time
a permit is obtained for the installation of an electrical circuit. Your Caldera dealer can provide information on which
permits may be required.
®
spa is equipped with a locking cover that meets the ASTM

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Paradise Series Martinique and is the answer not in the manual?

Questions and answers

Summarization of Contents

Site Selection and Preparation
Indoor/Basement Installation
Guidelines for placing a spa indoors, focusing on flooring, drainage, and ventilation to prevent moisture damage.
Deck Installation
Requirements for installing a spa on a deck, emphasizing load capacity and structural integrity.
Outdoor and Patio Installation
Considerations for outdoor spa placement, stressing the need for a solid foundation.
Ground and Spa Leveling Preparation
Instructions on preparing the ground surface and leveling the spa for proper installation and support.
Spa Dimensions
Utopia Cantabria™ Dimensions
Detailed front and bottom view dimensions for the Utopia Cantabria™ spa model.
Utopia Geneva™ and Utopia Niagara® Dimensions
Detailed front and bottom view dimensions for Utopia Geneva™ and Utopia Niagara® spa models.
Utopia Tahitian® and Paradise Hawaiian Dimensions
Detailed front and bottom view dimensions for Utopia Tahitian® and Paradise Hawaiian spa models.
Utopia Elation® Dimensions
Detailed front and bottom view dimensions for the Utopia Elation® spa model.
Paradise Moorea® Dimensions
Detailed front and bottom view dimensions for the Paradise Moorea® spa model.
Paradise Martinique® Dimensions
Detailed front and bottom view dimensions for the Paradise Martinique® spa model.
Paradise Kauai® Dimensions
Detailed front and bottom view dimensions for the Paradise Kauai® spa model.
Electrical Requirements
230 Volt Installation
Guidance on 230V installation, dedicated circuits, GFCI protection, and wiring specifications.
230 Volt Converted Cantabria™
Specific electrical requirements for the Cantabria™ model, including a higher amperage breaker.
Power Connection
Steps for connecting power to the spa, including access to the control box and wiring.
Wiring Diagrams
Geneva™, Tahitian®, Niagara®, Elation® Wiring
Wiring illustration and specifications for Geneva, Tahitian, Niagara, and Elation spa models.
Cantabria™ Wiring
Wiring illustration and specifications for the standard Cantabria™ spa model.
Cantabria™ (Converted) Wiring
Wiring illustration and specifications for the converted Cantabria™ spa model.
Paradise Series Wiring
Wiring illustration and specifications for the Paradise Series spa models.
Services Available from Your Caldera® Spa Dealer
Dealer Services and Products
Overview of services offered by dealers, including site inspection, setup, and available water care products.

Table of Contents