Fujitsu ST6012 - Stylistic Tablet PC User Manual page 70

Figure 17. Accessing the Memory Slot
Removing a Memory Module
To remove a DIMM module:
1
Ensure that the Tablet PC is off. To do so, carry out the Shut
Down command in the Start menu. (Do not attempt to
remove or install a DIMM module when the system is in
Sleep mode or running.)
2
Remove the screws from the cover plate on the back of the
Tablet PC and remove the cover plate as shown in Figure 17.
3
Spread the finger latches on the socket that lock the DIMM
module in place until the DIMM module is loose.
4
Remove the DIMM module from the socket.
See "Installing a Memory Module" to install a new module.
Memory
module
cover
70 - User-Installable Features
Alignment key
Figure 18. Installing a DIMM Module
Finger latch
Figure 19. Removing a DIMM Module
Alignment key
Finger latch