Fujitsu ST6012 - Stylistic Tablet PC User Manual page 27

In the following table, a "blinking" LED flashes at the rate of once per second; an LED that is "blinking, slow" flashes at the rate of one second on,
five seconds off.
Icon
Battery • On State
• Idle Mode
• Sleep, without AC
adapter
• Sleep with AC
adapter
• Hibernate, with AC
adapter
• Off State
• Hibernate, without
AC adapter
Power • On State
• Idle Mode
• Sleep
• Off State
• Hibernate
Mode/State
Green, continuous
Amber, continuous
Red, continuous
Red, blinking
Green, blinking slow
Amber, blinking slow
Red, blinking slow
Off
Green, continuous
Green, blinking
Off
LED State
Battery charge is between 50%-100%
Battery charge is between 13%-49%
Battery charge is between 0%-12%
There is a battery error.
Battery charge is between 50%-100%.
Battery charge is between 13%-49%.
Battery charge is between 0%-12%.
Battery is not installed, or system is off or in Hibernate
mode.
If battery is inserted during power off, LED blinks amber
for 4 seconds to detect battery. Battery status is
displayed for 5 seconds after that.
The system is powered on and ready for use.
The system has suspended and saved active settings to
RAM.
The system has suspended and saved settings and data
to the hard disk drive.
Table 1. System Status Indicators
27 - Status Display
Remarks