Vpn - HP FB359UA#ABA User Manual

Cancel printing
1 Open Print Manager .
2 Do one of the following:
• To cancel a single print job: Tap the print job under Print Queue.
• To cancel all your print jobs: Tap
Remove a printer
Your device does not need to be connected to a wireless network to
remove a printer that you had set up to print on that network.
1 Open Print Manager .
2 Tap Add or remove printer.
3 Tap the network name listed under the Add Printer button and select
the network that the printer you want to remove is associated with.
4 Tap Remove beside the printer you want to remove, and then tap
Yes.

VPN

What is VPN?
If you want to use your device to access files on your company's servers,
you may need to set up a VPN (virtual private network). You can do this
using the VPN application. VPN enables you to log in to your corporate
server through the company's firewall (security layer). You need to set up
a VPN to access a corporate server in any of the following situations:
• Your company's wireless local area network (LAN) is outside the
firewall.
Cancel All.
• Your company's wireless LAN is inside the firewall, but you are
accessing the network from outside the firewall (for example, from a
public location or at home).
Check with your company's system administrator to see if a VPN is
required for accessing the corporate network.
Being connected to VPN may sometimes interfere with web browsing. If you
TIP
are having problems browsing in Web, disconnect VPN (see
profile) and then try using Web again.
Add a VPNC VPN profile
VPNC is a Cisco-compatible IPSEC client.
Get the following information from your system
BEFORE YOU BEGIN
administrator:
• Profile name
• VPN server
• Username and password
• Group ID
• Group secret
• Domain
• Dead peer detection setting: When selected, if no VPN traffic is
received for five minutes, the client checks to see if the VPN server is
still available.
• Encryption method: Secure, Weak, None:
use more secure AES or 3DES algorithms.
1DES algorithm. Strong encryption may still be used, depending on
what the VPN server decides. None
is not disabled and may still be used, depending on the VPN server.
With the None option, the VPN profile is simply allowed to use no
encryption.
• NAT traversal method: Cisco-UDP, NAT-T (always), NAT-T (auto-detect),
or Disabled
1 Open VPN .
Disconnect from a
Secure forces the client to
Weak allows the weaker
enables no encryption. Encryption
Chapter 14 : Wireless connections 163