Ejecting A Expresscard - Fujitsu FPCM11383 Easy Manual

► Gently push the ExpressCard into the slot until you feel it click into place.
Please refer to the documentation for the ExpressCard for driver installation instructions.
i

Ejecting a ExpressCard

► Press the eject button (1) so that the ExpressCard slightly protrudes from the notebook.
If the eject button is flush, you must first cause the eject button to release from the notebook
casing. To do this, press the eject button so that it unlatches.
► Pull the ExpressCard (2) out of the slot.
► Insert the placeholder for the ExpressCard into the slot guide.
► Gently slide the placeholder for the ExpressCard into the slot until you feel it click into place.
A26391-K220-Z227-1-7619, edition 1
2
1
Using your notebook
53