Troubleshooting and tips
Take note of the safety notes in the "Safety" manual, when you connect or disconnect
!
cables.
Help if problems occur
Should you ever have a problem with your computer that you cannot solve yourself, in many cases
you can solve it quickly using the SystemDiagnostics program pre-installed on your computer.
►
To start the SystemDiagnostics program, click Start - Programs - Fujitsu Siemens Computers -
SystemDiagnostics.
or
►
To start the SystemDiagnostics program, click Start - Programs - Fujitsu - SystemDiagnostics.
►
If a problem is detected during the test run, the SystemDiagnostics program outputs a code (e.g.
DIFS code YXXX123456789123).
►
Take a note of this DIFS code and the ID number of your device. The ID number can be found
on the type rating plate on the back of the casing.
►
If you still need assistance resolving the problem, contact the relevant Help Desk for your
country (see the Help Desk List or go to http://ts.fujitsu.com/support). Have the ID/serial No. of
your system and the DIFS code ready.
A26391-K220-Z227-1-7619, edition 1
81