Port Replicator
The port replicator (available as an accessory) is a docking device with which you can quickly
connect your notebook to your peripheral devices. For this purpose, the port replicator has standard
ports for monitor, HDMI, LAN and USB devices.
Only use the supplied 100 W mains adapter from Fujitsu Technology Solutions to run the
i
port replicator.
Additional information on the port replicator and on the various external devices that can
be connected to it is contained in the chapter "Connecting external devices".
Setting up the Port Replicator
Select a suitable location for the Port Replicator before setting it up. Consider the following
!
points when looking for a location:
●
Never place the Port Replicator on a soft surface (e.g. carpeting, upholstered
furniture, bed). This can block the air vents of the notebook and cause overheating
and damage.
●
Place the Port Replicator on a stable, flat and nonslippery surface. Please note that
the rubber feet may mark certain types of surfaces.
●
Never place the Port Replicator and the mains adapter on a heat-sensitive surface.
●
Do not expose the Port Replicator to extreme environmental conditions.
Protect the Port Replicator from dust, humidity and heat.
A26391-K220-Z227-1-7619, edition 1
Using your notebook
57