Fujitsu FPCM11383 Easy Manual page 55

Fujitsu Menu calling
Pressing the Fn tablet button twice in quick succession will bring up the Fujitsu
Menu on your screen. The Fujitsu Menu is used to change certain system
settings.
Logon to the system or call the Windows Task Manager
If you hold the
the system again:
– after booting up the system
– after disabling the system
– when returning from power management mode
After log-on, pressing the
Windows Task Manager or - on the network - opens the security window.
Key combinations
+
Launch the Fujitsu Startcenter
This button starts the Fujitsu Startcenter.
+
Launch the Mobility Center
This button starts the Mobility Center.
Switch the display output to an external monitor (analog)
+
If you have connected a monitor to the VGA monitor port (directly on the
notebook or via the Port Replicator), you can use this key combination to switch
the display output between the LCD screen of the notebook and the external
monitor.
The tablet button
i
buttons for the button combination one after the other instead of needing to press them
both at the same time. After pressing the
seconds) to press the second button.
A26391-K220-Z227-1-7619, edition 1
tablet button down for two seconds, you can log back onto
tablet button for two seconds launches the
has a practical delay function: This allows you to press the two
Using your notebook
tablet button, you have a short time (2 to 3
45