Editing The Hosts File - Dell PowerVault 745N Deployment Manual
Configuring windows® firewall to work with dell
powervault nas systems (.pdf)
Hide thumbs
Also See for PowerVault 745N:
- Administrator's manual (25 pages) ,
- Reinstalling the operating system (16 pages)
Table of Contents
Advertisement
Figure 2.2 shows a network topology for a single Windows Storage Server computer that hosts
databases and log files for two Exchange servers. For each Exchange server, a dedicated
network handles Exchange database traffic to and from the Windows Storage Server computer.
Figure 2.2 Sample Network Topology for a Single Windows Storage Server Computer
Hosting Storage Groups for Two Exchange Servers
In the simplest case, the dedicated network is created by using a crossover cable. In a more
complex case, a Gigabit switch with dedicated local area network (LAN) capability can be used.
In either case, the Exchange server and Windows Storage Server computer should be in close
physical proximity, with no more than one switch or hub between them. In addition, the network
adapters that are used for the dedicated network should be configured to use static IP addresses.
If a dedicated network is not set up, the Exchange server and the Windows Storage Server
computer communicate by using the public network. This can affect performance because of the
bandwidth requirements of Exchange server.
Editing the Hosts File
If a dedicated network is set up between the Exchange server and the Windows Storage Server
computer, the hosts file on both the Exchange server and the Windows Storage Server computer
must be edited to use that network. The hosts file for each server is located in the
%windir%\system32\drivers\etc\ folder. The referenced network adapters are used for the
dedicated network.
The following procedure describes how to modify the hosts file for the Exchange server and the
hosts file for the Windows Storage Server computer so they can use a dedicated network. The
examples in the procedure use the sample hosts file information shown in Table 2.2.
Table 2.2 Sample Hosts File Information
Description
Computer name
IP address of Gigabit network adapter
Feature Pack Deployment Guide
Windows Storage Server
storage-01
exchange-01
10.0.0.1
10.0.0.2
Installing the Feature Pack
Exchange Server
29
Advertisement
Table of Contents
