Adding Target Disk Luns For Encryption - Brocade Communications Systems 1606 Administrator's Manual

Adding target disk LUNs for encryption

You can add a new path to an existing disk LUN or add a new LUN and path by launching the Add
New Path wizard. Take the following steps to launch the Add New Path wizard.
1. Select Configure > Encryption.
2. Right-click a group, switch, or encryption engine or select a group, switch, or encryption engine
FIGURE 35
3. Select Add.
FIGURE 36
4. Select the target port from the Target Port list.
Fabric OS Encryption Administrator's Guide
53-1001864-01
The Encryption Center dialog box displays.
from the Encryption Devices table and select Disk LUNs.
The Encryption Disk LUN view displays
Encryption Disk LUN view
The Add New Path wizard Select Target Port dialog box displays
Add New Path Wizard

Adding target disk LUNs for encryption

(Figure 35).
(Figure
2
36).
57