Brocade Communications Systems 1606 Administrator's Manual page 200

6
Encryption group and HA cluster maintenance
4. Perform one of the following steps to remove the member node from the encryption group.
182
SecurityAdmin:switch>cryptocfg --show -groupmember \
10:00:00:05:1e:41:99:bc
Node Name:
State:
Role:
IP Address:
Certificate:
Current Master Key State:
Current Master KeyID:
b8:2a:a2:4f:c8:fd:12:e2:a9:25:d9:5b:58:2c:96:7e
Alternate Master Key State: Not configured
Alternate Master KeyID:
00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00
EE Slot:
SP state:
Current Master KeyID:
b8:2a:a2:4f:c8:fd:12:e2:a9:25:d9:5b:58:2c:96:7e
Alternate Master KeyID:
00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00
No HA cluster membership
a. If the node is in the DISCOVERED State and the security processor (SP) state is online as
shown, and you wish to remove the node from the encryption group permanently, proceed
to step 4.
b. If the node is not in the DISCOVERED State, and you wish to remove the node from the
encryption group permanently, de-register the node. Log into the group leader and enter
the cryptocfg dereg -membernode command followed by the node WWN.
--
SecurityAdmin:switch>cryptocfg --dereg -membernode 10:00:00:05:1e:41:99:bc
Operation succeeded.
a. Log into the member node and enter the
This command clears all node states pertaining to group membership.
SecurityAdmin:switch>cryptocfg --leave_encryption_group
Leave node status: Operation Succeeded.
b. On the group leader, enter the cryptocfg
node WWN. This command removes the node from the encryption group.
SecurityAdmin:switch>cryptocfg --eject -membernode 10:00:00:05:1e:41:99:bc
Eject node status: Operation Succeeded.
10:00:00:05:1e:41:99:bc
DEF_NODE_STATE_DISCOVERED
MemberNode
10.32.33.145
10.32.33.145_my_cp_cert.pem
Saved
0
Online
leave_encryption_group command
cryptocfg --
eject -membernode command followed by the
--
Fabric OS Encryption Administrator's Guide
(current node)
.
53-1001864-01