Brocade Communications Systems 1606 Reference page 690

10
TRCE-1011
Probable Cause Indicates that the trace daemon (traced), used for transferring trace files, failed to start. The trace
capability within the switch is unaffected. The traced facility is normally restarted automatically by
the system after a brief delay.
Recommended If the message persists, restart the CP (dual-CP system) or restart the switch.
Action
Run the supportFtp command to set up automatic FTP transfers; then run the supportSave
command and contact your switch service provider.
Severity ERROR
TRCE-1011
Message
<timestamp>, [TRCE-1011], <sequence-number>,, INFO, <system-name>, Trace dump
manually transferred to target ' <optional string to indicate which slot the dump
is ftped out.> ': <result>.
Probable Cause Indicates that a manual transfer of trace dump files has occurred.
Recommended No action is required.
Action
Severity INFO
TRCE-1012
Message
<timestamp>, [TRCE-1012], <sequence-number>,, WARNING, <system-name>, The system
was unable to retrieve trace information from slot
the attempt was made on>
Probable Cause Indicates that communication between the main system and the indicated slot is unavailable.
Recommended Make sure the blade is enabled and retry the command. If the blade is already enabled, run the
Action supportSave command and contact your switch service provider.
Severity WARNING
620
.
<Slot number of the blade
Fabric OS Message Reference
53-1001338-01