Brocade Communications Systems 1606 Reference page 344

Brocade fabric os message reference v6.3.0 (53-1001338-01, july 2009)

Hide thumbs Also See for 1606:

Table of Contents

Probable Cause

Indicates that the active control processor (CP) and the standby CP in a dual CP system are running

firmware that are incompatible with each other. If the active CP fails, the failover will be disruptive.

In a switch system, this message is logged when a firmware upgrade or downgrade was invoked.

The new firmware version is not compatiable with the current running version. This causes a

disruptive firmware upgrade or downgrade.

For a dual CP system, run the firmwareDownload command to load compatible firmware on the

standby CP. For details on this command, refer to the Fabric OS Command Reference Manual.

Fabric OS Message Reference

53-1001338-01

Chapters

Table of Contents