Brocade Communications Systems 1606 Reference page 155

C2-1009
Message
Message <timestamp>, [C2-1009], <sequence-number>,, WARNING, <system-name>, <slot
number>, <port number><blade port number>: portcfglongdistance
vc_translation_link_init = 1 overwrites fill word IDLE. ARB will be used on the
link.
Probable Cause Indicates portcfglongdistance vc_translation_link_init 1 overwrites fill word IDLE. ARB will be used
on the link.
Recommended No action is required.
Action
Severity WARNING
C2-1010
Message
Message <timestamp>, [C2-1010], <sequence-number>,, CRITICAL, <system-name>,
<slot number>, <chip index>: Internal monitoring of faults has identified suspect
hardware, blade may need to be reset or replaced: fault1:<fault1_cnt>,
fault2:<fault2_cnt> thresh2:0x<threshold_used>.
Probable Cause Indicates that hardware errors are being observed that could be impacting data traffic. The
identified hardware may need to be reset, or it may indicate that the identified hardware needs to
be replaced.
Recommended Power cycle the faulted blade. If the problem persists, replace the blade.
Action
Severity CRITICAL
Fabric OS Message Reference
53-1001338-01
11
C2-1009
85