Related Manuals for Owon AG051
Summarization of Contents
Safety Terms and Symbols
Safety Terms
Defines warning, caution, and danger terms used in the manual.
Safety Symbols
Explains the graphical symbols used on the product and in the manual.
General Characteristics
Features and Benefits
Highlights the key features and advantages of the arbitrary waveform generator.
Quick Start
Front Panel Overview
Detailed explanation of the instrument's front panel controls and indicators.
Rear Panel Overview
Details the connectors and ports located on the rear of the instrument.
User Interface Overview
Explains the on-screen display elements and operational interface.
General Inspection
Steps to check the instrument for any damage upon receipt.
Foot Stool Adjustment
Instructions for adjusting the instrument's tilt feet for optimal viewing.
Power-On Check
Procedures for initial checks and powering on the instrument.
Front Panel Operation
Basic Waveform Generation and Configuration
How to output and configure Sine, Square, Ramp, Pulse, Noise, and Arbitrary signals.
Advanced Waveform Generation
Creating custom waveforms and generating modulated, sweep, and burst signals.
Instrument Configuration and Management
Settings for file management, utility functions, display, output, sync, DC, LAN, system, beep, clock, and help.
Communication with PC
Using USB Port
Connecting the waveform generator to a PC via USB cable and installing drivers.
Using LAN Port
Connecting the instrument to a network via LAN for PC control.
Connect through a router
Steps for establishing a LAN connection using a network router.
Using COM Port
Connecting the instrument to a PC using a COM serial port.
Troubleshooting
Instrument Power and Display Issues
Solutions for when the instrument powers on but shows no display.
Signal Amplitude Discrepancies
Troubleshooting guide for when measured amplitude differs from displayed value.
Sync Output Terminal Problems
Steps to resolve issues with the sync output signal not functioning.
Technical Specifications
Waveform and Frequency Specifications
Details on waveform types, frequency ranges, and characteristics.
Amplitude and Output Specifications
Information on amplitude, DC offset, output impedance, and load settings.
Modulated, Sweep, and Burst Specifications
Performance details for modulation, sweep, and burst modes.
Interface, Display, Power, and Environment Specs
Specifications for communication interfaces, display, power, and environmental conditions.
Appendix
Appendix A: Enclosure
Lists the standard accessories included with the instrument.
Appendix B: General Care and Cleaning
Provides guidelines for maintaining and cleaning the instrument.
Need help?
Do you have a question about the AG051 and is the answer not in the manual?
Questions and answers