Table of Contents
Advertisement
Chapter 1 General Introduction....................................................................................................3
1.1 Summary.............................................................................................................................3
1.2 Product List.........................................................................................................................3
1.3 Environmental Condition................................................................................................... 3
1.4 specification........................................................................................................................ 5
1.4.1 display specification.....................................................................................................5
1.4.2 PLC specification......................................................................................................... 5
1.4.3 Appearance................................................................................................................9
1.4.4 Dimension................................................................................................................11
Chapter 2 PLC Introduction....................................................................................................... 11
2.1 Functions...........................................................................................................................11
2.1.1 CPU Status and LEDs................................................................................................ 11
2.1.2 USB Programming port..............................................................................................12
2.1.3 Serial Communication Port........................................................................................13
2.1.4 High Speed Counter and High Speed Pulse Output.................................................. 13
2.1.5 Edge Interrupts........................................................................................................... 14
2.1.6 Data Retentive and Data Backup............................................................................... 14
2.1.7 Real-time Clock (RTC).............................................................................................. 15
2.1.8 Backup Battery...........................................................................................................15
2.2 Wiring diagram................................................................................................................. 16
2.3 Dimension.........................................................................................................................19
2.4 Technical Specification.....................................................................................................20
Chapter 3 Software Introduction................................................................................................22
3.1 HMI programming............................................................................................................22
3.1.1 Create project............................................................................................................. 22
3.1.2 Edit configuration ...................................................................................................25
3.1.3 download link for HMI manual.............................................................................. 25
CONTENT
Kinco-HP
User Manual
1
Advertisement
Table of Contents
Related Manuals for Kinco HP070-33DT
Summarization of Contents
Chapter 1 General Introduction
1.1 Summary
Brief overview of the Kinco HMI-PLC integrated product.
1.2 Product List
Lists the available HMI-PLC models and their specifications.
1.3 Environmental Condition
Specifies the environmental conditions for proper operation.
1.4 Specification
Details the technical specifications of the HMI-PLC products.
1.4.1 Display Specification
Specifies the screen size, resolution, and brightness of the HMI.
1.4.2 PLC Specification
Details the PLC specifications, including I/O, memory, and communication.
1.4.3 Appearance
Illustrates the physical appearance and port layout of the HMI-PLC.
1.4.4 Dimension
Provides the physical dimensions and cutout sizes for the HP043 and HP070 models.
Chapter 2 PLC Introduction
2.1 Functions
Describes the basic functions and modes of the PLC CPU.
2.1.1 CPU Status and LEDs
Explains the CPU status modes (STOP, RUN) and associated LEDs.
2.1.2 USB Programming port
Details the USB port for programming and driver installation.
2.1.3 Serial Communication Port
Describes the serial communication ports and their capabilities.
2.1.4 High Speed Counter and High Speed Pulse Output
Covers high-speed counters and pulse output functions.
2.1.5 Edge Interrupts
Explains how edge interrupts are handled by the CPU.
2.1.6 Data Retentive and Data Backup
Details data retention and backup mechanisms using battery and EPROM.
2.1.7 Real-time Clock (RTC)
Describes the real-time clock functionality and its battery backup.
2.1.8 Backup Battery
Explains the role of the backup battery for PLC and RTC.
2.2 Wiring diagram
Shows the wiring connections for the HMI-PLC modules.
2.3 Dimension
Provides the physical dimensions and cutout sizes for the HP043 and HP070 models.
2.4 Technical Specification
Provides comprehensive technical specifications for DI, DO, AI, AO.
Chapter 3 Software Introduction
3.1 HMI programming
Guides on how to program the HMI using Kinco HPBuilder software.
3.1.1 Create project
Steps to create a new project in Kinco HPBuilder.
3.1.2 Edit configuration
Instructions for editing project configurations.
3.1.3 Download link for HMI manual
Provides a download link for the HMI manual.
3.2 PLC
Covers the PLC aspects of the HMI-PLC system.
3.2.1 Introduction
Introduces the PLC programming software and instructions.
3.2.2 Install driver of USB programming port
Guides on installing the USB driver for PLC programming.
3.2.3 High speed counter
Details the functionality and configuration of high-speed counters.
3.2.3.1 Operation Modes and Inputs of the High-speed Counters
Explains the different operation modes and input signals for high-speed counters.
3.2.3.2 Control Byte and Status Byte
Describes the control and status bytes for high-speed counters.
3.2.3.3 Preset value (PV value) setting
Details how to set preset values for high-speed counters.
3.2.3.4 "CV=PV” Event No.
Lists event numbers for "CV=PV" interrupts in high-speed counters.
3.2.3.5 How to use high speed counter
Provides methods for using and configuring high-speed counters.
3.2.4 How to use high speed pulse output
Explains how to use the high-speed pulse output function.
3.2.4.1 High speed pulse output instruction
Lists and describes instructions for high-speed pulse output.
3.2.4.2 How to use PLS instruction
Details the usage of the PLS instruction for PTO and PWM.
3.2.4.2.1 High-speed Pulse Output Function of HMI-PLC
Explains the high-speed pulse output functions for HP043 and HP070.
3.2.4.2.2 PTO/PWM Register
Lists and describes registers for PTO/PWM configuration.
3.2.4.2.3 PTO Operations
Details how to configure and operate PTO (Pulse Train Output).
3.2.4.2.4 PWM Operations
Details how to configure and operate PWM (Pulse Width Modulation).
3.2.5 How to Use Position Control Instructions
Guides on using position control instructions for precise movement.
3.2.5.1 How to Modify the Current Value of Position Control Instructions
Explains how to modify the current value in position control instructions.
3.3 The use of analog quantities
Covers the usage and configuration of analog input and output signals.
3.3.1 Wiring diagram
Provides wiring diagrams for analog signal connections.
3.3.2 Measurement Ranges and The measured value Representation
Details the measurement ranges and representation of analog signals.
3.3.3 Configuration in software
Guides on configuring analog channel parameters within the software.
Need help?
Do you have a question about the HP070-33DT and is the answer not in the manual?
Questions and answers