Table of Contents
Advertisement
Chapter 2
Hardware Installation
This chapter describes the procedures for installing the Intel
contains the following sections:
•
•
•
•
2.1
Requirements
The following items are required to install the RAID controller:
•
•
•
•
•
•
Intel strongly recommends using an uninterruptible power supply (UPS).
Intel RAID Controller SRCU42E
Section 2.1, "Requirements," page 19
Section 2.2, "Quick Installation," page 20
Section 2.3, "Detailed Installation," page 20
Section 2.4, "After You Have Installed the RAID Controller," page 25
®
An Intel
RAID Controller SRCU42E
A host computer with an available x8 PCI Express* expansion slot
The Resource CD
The necessary internal and/or external SCSI cables. Ensure that the SCSI cables conform
to all SCSI specifications.
Ultra, Ultra2, Ultra160, or Ultra320 SCSI hard disk drives (although backward
compatible, SCSI uses the speed of the slowest device on the bus)
The Intel® Portable Cache Module (optional) or one 128-, 256-, or 512-Mbyte 200 MHz
DDR1 ECC PC2700 DDR333 memory DIMM (your RAID Controller SRCU42E may
come with a 128 Mbyte DIMM pre-installed)
®
RAID Controller SRCU42E. It
19
Advertisement
Table of Contents
