Target Id's - Intel SRCU42E - Ultra320 SCSI PCI Express X8 RAID Storage Controller Hardware User's Manual

Figure 2.2 Inserting the Intel
Bracket Screw
server board
6) Set the Target IDs.
Set target identifiers (TIDs) on the SCSI devices. Each device in a channel must have a
unique TID. Provide unique TIDs for non-disk devices (CD-ROM or tapes), regardless
of the channel where they are connected. The Intel
automatically occupies TID 7, which is the highest priority. The arbitration priority for a
SCSI device depends on its TID.
Table 2-1

Target ID's

Priority Highest
TID 7 6
Detailed Installation
®
RAID Controller SRCU42E in a x8 PCI Express* Slot
Press Here
Edge of
5 . . . 2 1 0
Press Here
32-bit slot
x8 PCI Express*
slot
64-bit slots
(5 V)
®
RAID Controller SRCU42E
Lowest
15 14 . . . 9 8
22
(3.3 V)