®
Intel
Raid Controller SRCS28X
Characteristics
This chapter describes the characteristics of the Intel
includes these topics:
•
Section 4.1, "Intel® Raid Controller SRCS28X Characteristics" on page 21
•
Section 4.2, "Physical and Environmental Specifications" on page 23
®
4.1
Intel
®
The Intel
1.0a and is backward compatible with previous revisions of the PCI specification. The Intel
Controller SRCS28X supports the Serial ATA Specification, version 1.0, and Serial ATA II
Extensions to Serial ATA 1.0, Revision 1.0.
Table 2
summarizes the characteristics of the Intel
®
Table 2. Intel
Raid Controller SRCS28X Characteristics
Adapter
®
Intel
Raid
Controller
SRCS28X
The following subsections provide detailed descriptions of the Intel
®
4.1.1
Intel
®
The Intel
ATA ports and support RAID 0, RAID 1, RAID 5, RAID 10, and RAID 50. The Intel
Controller SRCS28X does the following:
•
Supports eight Serial ATA ports:
— Uses differential signalling
— Transfers data in frames
— Supports Serial ATA power management
•
Are compliant with the PCI-X and PCI 2.3 Specifications
•
Support up to a 64-bit/133 MHz PCI-X interface:
— Function in a 64-bit PCI slot
— Function at 133 MHz, 100 MHz, or 66 MHz
— Support 3.3 V
®
Intel
Raid Controller SRCS28X User Manual
Raid Controller SRCS28X Characteristics
Raid Controller SRCS28X conforms to the PCI-X Local Bus Specification, Revision
Ports
RAID Levels
8
0, 1, 5, 10, and 50
Raid Controller SRCS28X Characteristics in Detail
Raid Controller SRCS28X is an intelligent RAID controller that provides eight Serial
®
Raid Controller SRCS28X. This chapter
®
Raid Controller SRCS28X.
PCI Bus Mode
6.6 x 4.2 inches (168 ×
64 bits, 133 MHz PCI-X
107 mm)
®
Raid Controller SRCS28X.
4
®
Raid
Board Dimensions
®
Raid
21
Need help?
Do you have a question about the SRCS28X - RAID Controller and is the answer not in the manual?