Battery Backup Unit (Bbu) Installation - Intel SRCS28X - RAID Controller User Manual

Figure 2. Battery Backup Unit (BBU) Installation
3. Power down the system.
Turn off the computer and physically remove the power cord from the back of the power
supply. Remove the cover from the computer chassis. Disconnect the system from any
networks.
4. Configure the jumpers on the Intel
Configure the jumper settings on the Intel
definitions and locations provided in
Characteristics."
5. Carefully insert the Intel
Align the Intel
properly seat the Intel
®
Intel
Caution: Do not apply pressure to the battery backup unit when installing the board.
®
Intel Raid Controller SRCS28X User Manual
B
®
Raid Controller SRCS28X.
®
Raid Controller SRCS28X to a PCI-X slot. Press down gently but firmly to
®
Raid Controller SRCS28X in the slot.
Raid Controller SRCS28X in a slot.
C
®
Raid Controller SRCS28X.
®
Raid Controller SRCS28X using the jumper
Chapter 4, "Intel® Raid Controller SRCS28X
Hardware Installation
A
Figure 3 shows how to insert the
17