Create A Shape Tween - MACROMEDIA FLASH MX 2004-LEARNING FLASH Manual

Use the Selection tool to reposition the tire, if necessary.
3.
With the Selection tool still selected, in the TireAnim layer, select Frame 30. Then press F6 to
4.
insert a keyframe.
Select Frame 15 and press F6 to add another keyframe.
5.
With the playhead still on Frame 15, hold the Shift key to move the tire in a straight line, and
6.
drag the tire up.
In the TireAnim layer, select any frame between Frames 2 and 14. In the Property inspector,
7.
select Motion from the Tween pop-up menu.
An arrow appears in the Timeline between the two keyframes.
Select any frame between frames 16 and 29. Again, use the Tween pop-up menu in the Property
8.
inspector to select Motion.
Select File > Save to save your changes.
9.

Create a shape tween

With shape tweening, you specify attributes for a shape in one keyframe, and then modify the
shape or draw another shape in a subsequent keyframe. As with motion tweening, Flash creates
the animation in the frames between the keyframes.
You'll now set up a tween for the tire's shadow so that as the tire bounces, the shadow moves
and fades.
Click the ShadowAnim layer to select it.
1.
Select Frame 30 and press F6 to insert a keyframe; then select Frame 15 and press F6 to insert
2.
a keyframe.
Create a shape tween 87