MACROMEDIA FIREWORKS MX 2004-EXTENDING FIREWORKS Manual page 46

Property
frameName
gifDisposalMethod
ExportOptions object
Note: When this object is used to set properties, the only required property is
properties are not specified, their default values are used.
Use the following information to understand the rules for determining scaling in this object.
If is set to
useScale
export, and
applyScale
If is set to
useScale
on the object when it is exported.
If is set to
useScale
scaling as follows:
•
If the value is positive, specifies the exact size for the axis.
•
If the value is zero, specifies that the axis varies without limit.
•
If the value is negative, specifies that the axis varies but can be no larger than "
If one value is positive and one is negative, the positive value is always used. This gives the
following possibilities:
•
xSize < 0, ySize < 0
•
xSize < 0, ySize = 0
•
xSize < 0, ySize > 0
•
xSize = 0, ySize < 0
•
xSize = 0, ySize = 0
•
xSize = 0, ySize > 0
•
xSize > 0, ySize < 0
•
xSize > 0, ySize = 0
•
xSize > 0, ySize > 0
percentScale = 0 to 100
The following table lists the properties of the ExportOptions object, along with their data types
and, where appropriate, acceptable values and notes.
Property
animAutoCrop
animAutoDifference
applyScale
46 Chapter 2: The Fireworks Object Model
Data type
string
string
(the default),
true percentScale
is ignored.
and
false applyScale
and
false applyScale
– use
min(xSize, ySize)
– use scaling
xSize
– use scaling
ySize
– use scaling
ySize
– illegal; use
scale
– use scaling
ySize
– use scaling
xSize
– use scaling
xSize
– do not use; instead, use
Data type
Boolean
Boolean
Boolean
Notes
The name of the frame displayed in the
Frames panel. Default is
GIF89a frame disposal method. See the
GIF89a specification for details. Acceptable
values are
"unspecified"
,
"none" "background",
is used to uniformly scale the object on
is set to (the default), no scaling is performed
false
is set to , then
true xSize
scaling
of
1.0
useScale = true
Notes
The default value is
The default value is
The default value is
.
null
(the default),
and .
"previous"
. If other
exportFormat
and determine
ySize
"
abs(value)
and
.
true
.
true
.
true