MACROMEDIA FIREWORKS MX 2004-EXTENDING FIREWORKS Manual page 31

ContourNodeDynamicInfo object
The following table lists the properties of the ContourNodeDynamicInfo object, along with their
data types and, where appropriate, acceptable values and notes.
Property
duration
pressure
velocity
ControlPoint object
The following table lists the properties of the ControlPoint object, along with their data types
and, where appropriate, acceptable values and notes.
Property
hiliteDragOverObject
index •
name
toolTip
toolTipTracksDrag
type
visible
x
y
The following table lists the methods of the ControlPoint object, along with their parameters.
Method
RegisterMove()
RegisterLinearMove()
Data type Notes
float 0.0 to 65,535.0 milliseconds
float 0.0 to 1.0
float 0.0 to 255.9999 pixels per millisecond
Data type Notes
Boolean If
true
control point is dragged over it.
integer Index for the control point.
string Assigned name of the control point.
string Text to display when the user rolls the pointer
(mouse) over the control point.
Boolean If
true
string Determines the way the control point draws.
Values are:
"crossHair"
Boolean If
true
float Value of the x coordinate.
float Value of the y coordinate.
Parameter Definition
object The RegisterMoveParms object containing
the move parameters. Use
smartShape.GetDefaultMoveParms()
obtain this object, then adjust properties as
needed. For a list of properties, see
"RegisterMoveParms object" on page
point A point, which in combination with the node
point, defines the line to move along.
, Fireworks highlights an object when a
, the tooltip drags with the mouse.
,
"default" "defaultInverted"
.
, the control point is visible to the user.
Objects within Fireworks documents
,
to
56.
31