Download Print this page

Smittybilt 76740D Installation Instructions

Src classic front bumper for 1979-2006 jeep cj & wranglers

Advertisement

Quick Links

WWW
.SMITTYBILT.COM
NOTE: Carefully read entire instructions thoroughly before
Parts Included
Front Bumper
Washer Spacers
Step 1: Remove the factory front bumper and save the existing factory hardware.
Step 2: Install Rock Crusher Front Bumper onto vehicle using the factory hardware removed in step one.
Note: For CJ applications there is a gap between the frame and the mounting bracket. Use the (2)
spacers included, underneath each side between the frame and the bracket.
Rock Crawler
Bumper
Step 3: Tighten all hardware at this time. Installation is now complete.
NOTE:
To protect your investment, wax this product after installing. Regular waxing is recommended. Do not use any type of polish/wax that
contains abrasives that could damage the finish
Smittybilt's products are covered under the following limited warranties only. Note that the duration of the limited warranty differs according to the material and
finish of the product purchased. Subject to the duration and conditions of the limited warranty stated below, Smittybilt warrants to the original retail purchaser that
its products are free from defects in material and workmanship. All other warranties and representations express or implied, are hereby disclaimed, including fitness
for merchantability and buyer's intended use or purpose. All parts are sold "AS IS" except for the limited warranties granted herein. Buyer assumes all risks as to
the selection, suitability and performance of all goods and products selected. This limited warranty does not cover damage or impairment in any part due to misuse,
improper installation, accident or contact with on-road or off-road hazards, product modification, improper or inadequate cleaning and/or maintenance. Smittybilt is
not responsible for items damaged during shipping. This warranty is not transferable from the original buyer. For the original Buyer to be eligible for the limited
warranty coverage, the Buyer must provide proof of purchase. Smittybilt strongly recommends returning the warranty registration card.
Customer's remedy hereunder shall be limited only to repair or replacement (at Smittybilt's option) of any defective part(s) returned to Smittybilt at customer's
expense. The determination of whether or not a returned part is defective or subject to coverage under the limited warranties stated herein shall be made at
Smittybilt's sole discretion.
Limited Five (5) Year / 50,000 Mile Pro-Rata Warranty (whichever occurs first) on Dual-Stage Powder Coating Products -
Smittybilt dual-stage powder coated products carry the foregoing limited repair or replacement warranty for a period of (5) years or 50,000 miles (whichever
occurs first) from date of purchase against workmanship and defects in the material, provided that any claim submitted after (2.5) years from date of purchase
shall, if accepted, be satisfied by Smittybilt offering customer a credit on the purchase of a replacement product equal to fifty percent (50%) of customer's
initial purchase price.
To assure product quality, Smittybilt reserves the right to change product design, material, specification and finishes without prior notice to customers. This limited
warranty gives you specific legal rights and you may also have other rights, which may vary from state to state. Some states do not allow limitations on how long an
implied warranty lasts, so the above limitations may not apply as to you. Also, some states do not allow the exclusion or limitation of incidental or consequential
damages, so the above limitations or exclusions may not apply to you. Smittybilt reserves the right to discontinue product lines and substitute products, or provide
other remedies than those listed in this limited warranty for those discontinued products.
For Technical Support/Warranty Information please call 310-762-9944
attempting to install this part.
Qty
1
2
Vehicle
Frame
Smittybilt, 400 West Artesia Blvd, Compton CA 90220
Installation Instructions
SRC Classic Front Bumper (#76740, 76740D)
1979-2006 Jeep CJ & Wranglers
Tools Needed
Factory Bolts
Washer Spacers (CJ) only
Warranty
Ratchet
#55 Torx Bit

Advertisement

loading
Need help?

Need help?

Do you have a question about the 76740D and is the answer not in the manual?

Questions and answers

This manual is also suitable for:

76740