Download Print this page

Advertisement

LC 118, LC 219P, LC 419A, LC 419SP,
LC 19AP
EN
Operator's manual
2-16

Advertisement

loading
Need help?

Need help?

Do you have a question about the LC 419SP and is the answer not in the manual?

Questions and answers

Summarization of Contents

Introduction
Product overview
Visual identification of mower components and features.
Product description
Overview of the rotary lawn mower's functionality.
Intended use
Specifies the authorized purpose for using the product.
Symbols on the product
Explains safety symbols and their meanings on the mower.
Safety Definitions
Product Liability
Outlines the manufacturer's liability limitations for product use.
General Safety Instructions
Work Area Safety
Guidelines for preparing and maintaining a safe work environment.
Work Safety
Essential precautions for operating the product safely.
Safety Instructions for Operation
Personal Protective Equipment
Recommends specific safety gear for operator protection.
Safety Devices on the Product
Importance and checks for built-in safety features.
Muffler
Information on muffler heat, fire risk, and noise reduction.
Fuel Safety
Precautions for safe handling of fuel.
Safety Instructions for Maintenance
Assembly
Instructions for assembling the lawn mower components.
Operation
Before You Operate the Product
Pre-operation checks and manual review essential for safe use.
To Fill Fuel
Safe procedures for refueling the lawn mower.
To Set the Cutting Height
How to adjust the lawn mower's cutting height.
To Start the Product
Detailed steps for safely starting the engine.
Maintenance
Maintenance Schedule
Overview of scheduled maintenance tasks and intervals.
To Examine the Cutting Equipment
To do a general inspection
General checks for product condition and fastener security.
To clean the product externally
Methods for cleaning the exterior of the lawn mower.
To clean the inner surface of the cutting cover
Steps for cleaning the inside of the cutting deck.
To do a check of the oil level
To replace the engine oil
Procedures for draining and refilling engine oil.
Air filter
Information and replacement guidelines for the air filter.
To remove and install the air filter (LC 19AP)
To clean the air filter
Instructions on how to clean the air filter properly.
To examine the spark plug
How to inspect and check the spark plug for performance.
Troubleshooting
The engine does not start.
Potential causes and solutions for engine starting issues.
The engine does not stop.
Troubleshooting steps if the engine fails to stop.
The engine does not operate smoothly.
Solutions for uneven engine operation.
The engine becomes too hot.
Reasons for engine overheating and their solutions.
Transportation, Storage and Disposal
Transportation and storage
Guidelines for safely transporting and storing the product.
Disposal
Proper procedures for disposing of the product and its components.
Technical Data
Engine
Specifications related to the engine's performance and type.
Ignition System
Details about the spark plug and ignition system.
Fuel and Lubrication System
Information on fuel and oil capacities and types.
Weight
Product weight specifications.
Cutting
Specifications related to the cutting system and features.
Cutting Height Positions
Cutting Height, mm
Range of cutting heights available in millimeters.
Cutting Width, mm
The cutting width of the mower in millimeters.
Cutting System
Types of cutting systems offered (Collection, Bio-clip).
Blades
Type of blades used in the mower.
Grass Catcher Capacity, Liter
The volume of the grass catcher in liters.
Drive System
Information on the mower's drive system (Push, Self-propelled).