Related Manuals for IFM O2D504
Summarization of Contents
1 Preliminary note
1.1 Symbols used
Explains symbols used in the document for instructions and warnings.
1.2 Warnings used
Details the warning symbols and their meanings for property and personal injury.
1.3 Safety symbols on the unit
Describes safety symbols found on the device itself related to electrical and photobiological safety.
1.4 Legal and copyright information
Contains legal notices, copyright, and usage rights for the document.
1.5 Open source information
Lists open source licenses and terms applicable to the product's software.
2 Safety instructions
2.1 Photobiological safety
Discusses photobiological safety classification, risk groups, and protective measures.
2.2 Cyber security
Addresses cybersecurity aspects, network security, and potential vulnerabilities of the unit.
3 Intended use
3.1 Application area
Specifies operating conditions, environmental ratings, and EMC considerations for device use.
4 Function
4.1 Overview of device functions
Lists the main functions and capabilities of the object recognition sensor.
4.2 Web front end
Explains how to access and use the web interface for device information and setup.
4.3 Triggering image captures
Details methods for triggering image captures using internal or external signals.
4.4 Switching outputs
Describes the configuration and standard settings for the device's switching outputs.
4.5 Switching inputs
Explains the function of switching inputs for static and pulse-controlled application switching.
4.6 Internal illumination
Details the internal illumination LEDs, their functions, and specifications for different models.
5 Mounting
5.1 Installation instructions
Provides guidelines and limits for installing the unit, considering humidity and environmental factors.
5.2 Mounting with clamp
Describes the procedure for mounting the unit using a clamp and associated hardware.
5.3 Mounting with dome illumination
Details the process of mounting the unit along with a dome illumination accessory.
6 Electrical connection
6.1 Wiring
Explains the M12 connector pin assignments for Ethernet and Ethernet/IP interfaces.
6.2 Wiring example
Illustrates a wiring example for external triggering using a proximity sensor.
6.3 External illumination
Describes how to connect and use an external illumination unit with the sensor.
7 Installation
7.1 Update firmware
Guides on how to update the device firmware using the ifm Vision Assistant software.
8 Operating and display elements
8.1 Signal indications
Explains the meaning of various LED indicators and signal states on the device.
10 Parameter setting
10.1 Focus the optics using the multi-function key
Details how to use the multi-function key to adjust the device's focus.
10.2 Configure or lock the multi-function key
Explains how to configure or lock the multi-function key via software.
11 Operation
11.1 Over temperature protection
Describes the over temperature protection feature and conditions that may activate it.
13 Maintenance, repair and disposal
13.1 Replace the unit
Provides instructions for replacing the unit and transferring configuration data.
Need help?
Do you have a question about the O2D504 and is the answer not in the manual?
Questions and answers