Table of Contents
Advertisement
Trademarks
®
Autel
,
MaxiIM
®
MaxiRecorder
, and MaxiCheck
Corp., Ltd., registered in China, the United States and other countries. All other
marks are trademarks or registered trademarks of their respective holders.
Copyright Information
No part of this manual may be reproduced, stored in a retrieval system or
transmitted, in any form or by any means, electronic, mechanical, photocopying,
recording, or otherwise without the prior written permission of Autel.
Disclaimer of Warranties and Limitation of Liabilities
All information, specifications and illustrations in this manual are based on the
latest information available at the time of printing. Autel reserves the right to make
changes at any time without notice. While information of this manual has been
carefully checked for accuracy, no guarantee is given for the completeness and
correctness of the contents, including but not limited to the product specifications,
functions, and illustrations.
Autel will not be liable for any direct damages or for any special, incidental, or
indirect damages or for any economic consequential damages (including the loss
of profits).
IMPORTANT: Before operating or maintaining this unit, please read this manual
carefully, paying extra attention to the safety warnings and precautions.
For Services and Support:
pro.autel.com
www.autel.com
1-855-288-3587/1-855-AUTELUS (North America)
0086-755-86147779 (China)
support@autel.com
For technical assistance in all other markets, please contact your local distributor.
®
®
,
MaxiCOM
,
®
®
MaxiDAS
,
are trademarks of Autel Intelligent Technology
i
®
MaxiScan
,
MaxiTPMS
®
,
Advertisement
Table of Contents
Related Manuals for Autel MaxiVCI V200
Summarization of Contents
Safety Information
Safety Messages
Explains hazard level indicators like DANGER and WARNING.
Safety Instructions
Provides essential safety guidelines for operating the tool.
Using This Manual
Conventions
Describes text formatting and symbols used in the manual for clarity.
General Introduction
MaxiIM KM100 Overview
Introduces the MaxiIM KM100 key tool and its capabilities.
MaxiVCI V200 Interface
Details the MaxiVCI V200 device used for vehicle communication.
Getting Started
Powering Up the Device
Step-by-step guide on how to turn on the device.
Powering Down the Device
Instructions for safely shutting down the device.
Universal Key Operations
Confirm Vehicle Information
Guide on entering vehicle details for key programming.
Key Generation and Programming
Instructions for generating and programming universal keys.
Transponder Reading and Cloning
Transponder Reading
Process for reading transponder data from keys.
Transponder Cloning
Steps to clone transponder information to a new key.
Transponder Editing
How to read and modify transponder data.
Transponder Functions
Transponder Generation
Procedure to generate new transponders for vehicles.
Transponder Simulation
Simulating transponder signals for emergency starts.
ID63 to ID83 Conversion
Function for converting specific Ford transponder types.
Frequency Detection
Detect Smart Key Frequency
How to check the frequency of smart keys.
IMMO System Operations
IMMO Getting Started
Initial steps to establish IMMO system communication.
Vehicle Identification for IMMO
Methods for identifying the vehicle for IMMO functions.
IMMO Status Scan
Scanning the IMMO system for faults and DTCs.
Control Unit Operations
Navigating control units for IMMO tasks like Key Learning.
Key IMMO Functions
Covers Hot Function and Vehicle IMMO Information retrieval.
Special Functions
IMMO Data Processing
Loading IMMO ECU data to calculate passwords and create new keys.
Key Unlocking
Renewing used smart keys for new car applications.
Toyota Smart Unlocking
Unlocking Toyota smart keys for different models.
Universal Key Information Detection
Reading Autel universal key details like serial number and ID.
Button Customization
Assigning functions to buttons on the Autel universal key.
Ignition Coil Detection
Gathering IMMO protocol and transponder data from ignition coils.
Settings and Configuration
Market Selection
Selecting the operational region (Europe or North America).
User Feedback
Reporting product issues and providing feedback to support.
VCI Manager
Pairing, status checks, and firmware updates for the VCI.
System Settings
Adjusting device settings like network, sound, and display.
Units of Measurement
Setting measurement units for the diagnostic system.
About Device Information
Displaying tool information like version and serial number.
Data Management
Test Records Management
Storing and reviewing historical test data.
Workshop Information Setup
Managing workshop details for report headers.
Image Management
Database for captured screenshots and editing options.
PDF File Handling
Viewing and managing PDF files.
Application Uninstall
Managing and removing installed applications.
Data Logging and Support
Recording and submitting diagnostic data for support.
Maintenance and Service
Maintenance Instructions
Guidelines for cleaning and caring for the device.
Troubleshooting Checklist
Helps diagnose and resolve common tool issues.
Battery Usage Information
Information on the device's battery and its care.
Service and Repair Procedures
Information on technical support, repair, and parts.
Compliance Information
Regulatory Compliance
Details FCC, SAR, RF, and CE compliance statements for the device.
Product Warranty
Limited One-Year Warranty
Outlines the terms and conditions of the product warranty.
Need help?
Do you have a question about the MaxiVCI V200 and is the answer not in the manual?
Questions and answers