Related Manuals for ASRock Industrial NUC BOX-1240P
Summarization of Contents
Chapter 1 Introduction
Package Contents
Lists all items included in the NUC 1200 BOX Series package.
Product Specifications
Details the CPU, memory, storage, LAN, WiFi, audio, and I/O specifications of the product.
Block Diagram
Visual representation of the NUC 1200 BOX Series internal component connections and data flow.
Chapter 2 Product Overview
Front View
Identifies and describes the ports and indicators on the front panel of the NUC.
Rear View
Identifies and describes the ports and indicators on the rear panel of the NUC.
Inside View
Shows the internal layout, including SO-DIMM slots, M.2 slots, and SATA connectors.
Chapter 3 Hardware Installation
Remove Bottom Case
Step-by-step guide on how to safely remove the bottom panel of the NUC for component access.
Install WiFi Module
Instructions for properly installing a WiFi module into its designated slot on the motherboard.
Remove M.2 SSD and Bracket
Procedures for safely removing an M.2 SSD and its associated bracket from the motherboard.
Install M.2 SSD
Guide on how to install an M.2 SSD, including standoffs and securing screws.
Install 2.5-inch Hard Drive
Steps for installing a 2.5-inch HDD or SSD, including bracket attachment and cable connections.
Install Memory Modules
Instructions for installing DDR4 SO-DIMM memory modules, emphasizing correct orientation and dual-channel configuration.
Chapter 4 Motherboard
Motherboard Layout
Diagram illustrating the location of key connectors, slots, and components on the motherboard.
Motherboard Specifications
Comprehensive technical specifications for the motherboard, detailing form factor, CPU, memory, graphics, and I/O.
Onboard Headers and Connectors
Detailed explanation of the function and pinouts for various onboard headers and connectors.
Expansion Slots (M.2)
Information on the M.2 slots available for SSD and Wi-Fi modules, including key types and interfaces.
Chapter 5 UEFI Setup Utility
Introduction to UEFI Setup
Explains the purpose and access methods for the UEFI SETUP UTILITY.
Main Screen Overview
Describes the system overview displayed on the UEFI Main screen.
Advanced Configuration Options
Covers detailed system configurations for CPU, Chipset, Storage, and other advanced settings.
Hardware Health Monitoring
Details how to monitor CPU temperature, fan speed, and system voltages within the UEFI.
Security Settings
Explains how to set or change supervisor/user passwords and configure Secure Boot.
Boot Configuration
Covers options for configuring boot order, boot from LAN, and Num-Lock settings.
Exit Options
Describes how to save changes, discard changes, load defaults, or launch EFI Shell from the Exit screen.
Chapter 6 Software Support
Install Operating System
Provides guidance on supported operating systems and general setup procedures.
Need help?
Do you have a question about the NUC BOX-1240P and is the answer not in the manual?
Questions and answers