Table of Contents
Advertisement
Advertisement
Chapters
Table of Contents
Related Manuals for Eaton 1000H
Summarization of Contents
Safety and EMC Instructions
Installation
Guidelines for safely installing the UPS system in various environments.
Operation
Instructions on how to properly turn the UPS on and off, and general operating procedures.
Maintenance
Procedures and precautions for maintaining the UPS, including handling hazardous voltages.
Delivery
Recommendations for shipping the UPS to prevent transit damage.
Storage
Proper storage conditions and battery charging intervals for the UPS.
Safety Caution
Critical warnings and precautions for all models and specific high-power models.
Product Introduction
Description of Commonly Used Symbols
Explanation of symbols used throughout the manual for user guidance.
Standards
Compliance information regarding safety and EMC international standards.
Installation
Unpacking and Inspection
Steps for unpacking the UPS and checking the package contents for completeness.
Notes for Installation
Important considerations and precautions before installing the UPS unit.
Installation for 1000H(XL)/ 2000H(XL)/ 3000H(XL)
Detailed installation instructions for specific lower-capacity UPS models.
Installation for 6000H(XL)/ 10000H(XL)
Detailed installation procedures for the higher-capacity UPS models.
Operation
Turn On and Turn Off
Step-by-step guide for powering the UPS on and off in different modes.
Parallel System Maintenance and Operation
Procedures for maintaining and operating UPS units in a parallel configuration.
Technical Data
Electrical Specifications
Detailed electrical characteristics and power ratings for various UPS models.
Operating Environment
Recommended temperature, humidity, and altitude for optimal UPS operation.
Dimensions and Weights
Physical specifications including dimensions and net weight for each UPS model.
Battery and Typical Energy Storage Time
Information on battery quantity, type, and typical backup times at different load levels.
Troubleshooting
For 1000H(XL)/ 2000H(XL)/ 3000H(XL)
A guide to diagnosing and resolving common problems for specific UPS models.
For 6000H(XL)/ 10000H(XL)
A guide to diagnosing and resolving common problems for higher-capacity UPS models.
Operating Mode for All Models
Utility Power Mode
Description of the UPS operation when connected to utility power.
Battery Mode
Description of the UPS operation when running on battery power.
Bypass Mode
Description of the UPS operation in bypass mode, bypassing normal regulation.
Fault Mode
Description of the UPS operation when a fault condition is detected.
Communication Port
RS232 Interface
Pin assignment and description for the RS232 communication port.
AS400 Interface (Option)
Pin assignment and description for the optional AS400 communication interface.
Need help?
Do you have a question about the 1000H and is the answer not in the manual?
Questions and answers