Table of Contents
Advertisement
SCALANCE W778-1 / W738-1
SIMATIC NET
Industrial Wireless LAN
SCALANCE W778-1 / W738-1
Operating Instructions
MSN65-W1-M12-E2
03/2022
C79000-G8976-C450-07
Introduction
Safety notices
Security
recommendations
Description of the device
Installation and removal
Connection
Maintenance and cleaning
Upkeep and maintenance
Technical specifications
Dimension drawing
Approvals
1
2
3
4
5
6
7
8
9
10
11
Advertisement
Table of Contents
Related Manuals for Siemens 6GK5738-1GY00-0AB0
Summarization of Contents
Introduction
Validity of the Operating Instructions
Outlines the specific products covered by these operating instructions.
Definition
Defines key terms and concepts used throughout the manual.
Purpose of the Operating Instructions
Explains the intended learning outcomes for users reading this manual.
Documentation on the accompanying CD
Lists the documentation provided on the product's accompanying CD.
Safety notices
General Safety Warning
A general caution to read the manual before operating or installing the device.
Hot surfaces Warning
Alerts users to hot device surfaces and the risk of severe burns.
Explosion Hazard Warning
Warns about potential explosion hazards associated with the device.
Security recommendations
General Security Recommendations
General advice for preventing unauthorized access to the device and network.
WLAN Security
Recommendations for ensuring secure wireless LAN client configurations.
Authentication Security
Guidance on authentication methods and password management.
Description of the device
4.1 Structure of the type designation
Explains the meaning and components of the device's type designation.
4.2 Device view
Provides a visual overview and labeling of the device's physical interfaces and components.
4.3 Components of the product
Lists the standard items included in the product package.
4.4 Accessories
Details available accessories for the device, including article numbers.
Installation and removal
5.1 Safety notices for installation
Important safety precautions to observe during device installation.
5.2 Types of installation
Describes the various mounting options available for the device.
5.3 Wall mounting
Step-by-step instructions for securely mounting the device on a wall.
5.4 Installation on a DIN rail
Instructions for attaching the device to a standard DIN rail.
Connection
6.1 Safety when connecting up
Critical safety guidelines for connecting the device to power and network.
6.2 Power supply
Information and requirements for powering the device correctly.
6.3 Ethernet
Details on connecting the device via its Ethernet interfaces.
6.4 Antenna connector
Instructions for connecting external antennas to the device's connectors.
Maintenance and cleaning
Unauthorized Repair Warning
Warns against unauthorized repair of explosion-proof device designs.
Impermissible Accessories Warning
Warns about using non-original accessories and spare parts.
Hot Surfaces Caution
Alerts users to hot device surfaces and the risk of burns during maintenance.
Cleaning the Housing Notice
Instructions for cleaning the device housing, with precautions for hazardous areas.
Upkeep and maintenance
8.1 Device configuration with PRESET-PLUG
Explains how to configure devices using the PRESET-PLUG functionality.
8.2 Restoring the factory settings
Provides steps to reset the device to its original factory default settings.
8.3 Firmware update via WBM or CLI not possible
Procedure for updating firmware when standard methods fail.
Technical specifications
Data transfer specifications
Details on Ethernet transfer rate and supported wireless standards.
Power supply for POE standards supported
Information on supported PoE standards and power classes.
Electrical data
Specifications for voltage, current consumption, and power loss.
Permitted ambient conditions
Operating temperature, humidity, and altitude limits for the device.
Dimension drawing
Front view dimensions
Shows the front view of the device with key dimensions indicated.
Side view dimensions
Displays the side view of the device with key dimensions indicated.
Approvals
Taiwan NCC Statement and Warnings
Regulatory statements and warnings for Taiwan, including MPE values.
Professional installation requirements
Guidelines for professional installation of RF parameters and settings.
Legal Information
Warning notice system
Explains the hazard grading system used for safety notices in the manual.
Qualified Personnel
Defines the necessary qualifications and experience for personnel operating the device.
Proper use of Siemens products
Outlines the principles for correct and safe usage of Siemens products.
Disclaimer of Liability
States the company's liability limitations regarding publication content consistency.
Need help?
Do you have a question about the 6GK5738-1GY00-0AB0 and is the answer not in the manual?
Questions and answers