Table of Contents
Troubleshooting
Related Manuals for Safeline SLB-COP
Summarization of Contents
Technical Data
Main Unit Specifications
Provides detailed technical specifications for the main unit, including power, connectivity, and environmental limits.
Voice Station Specifications
Lists technical specifications for the voice station, covering power, inputs, IP rating, and cable length requirements.
General Information
Safety Precautions
Details safety guidelines for installation, configuration, and use of the product by trained professionals.
Exclusion of Liability
Outlines the manufacturer's liability limitations regarding accidents, misuse, incorrect installation, or unauthorized modifications.
System Overview
Bus System Description
Explains the SL6+ system architecture, a two-way bus system for communication between main and voice stations.
System Architecture Diagram
Illustrates the system layout, showing the main unit and connected voice stations in an elevator context.
Installation and Mounting
Main Unit Mounting Instructions
Provides instructions for mounting the SL6+ main unit, emphasizing placement for GSM interference avoidance.
Voice Station Wiring Details
Voice Station Screw Terminal Wiring
Shows the wiring for voice station screw terminals, specifying connections for bus, pictograms, and inputs.
Front Panel LED Indicator Guide
Reset Button Functions Explained
Describes the functions of the reset button for showing GSM signal strength and initiating self-tests or resets.
Configuration Procedures
On-Site Configuration via Telephone
Explains how to perform on-site configuration using a PSTN tone dial phone connected to the main station.
Remote Configuration via Telephone
Describes the process of remotely configuring the SL6+ unit via a PSTN tone dial phone.
Remote Restart and On-Site Configuration
Initiate Remote Restart
Provides instructions for remotely forcing the SL6 main unit to restart.
On-Site Telephone Configuration Guide
Details the on-site configuration process using a telephone, including dialing and entering codes.
Operating Modes
Collective Fault Functionality
Describes the collective fault relay function, activated by system failures like power or battery issues.
Intercom and Outgoing Call Procedures
Intercom Between Units
Explains how to establish intercom calls between the main unit and voice stations.
Making Outgoing Calls
Describes how to make outgoing calls, including external calls via PABX or GSM.
Service and Battery Management
Battery Function and Maintenance
Discusses battery life, status checks, testing, and replacement procedures for the SL6+ unit.
Need help?
Do you have a question about the SLB-COP and is the answer not in the manual?
Questions and answers