Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for ATO MF5712
Summarization of Contents
Understanding the MF5700 Gas Mass Flow Meter
Product Description
Details the components and physical features of the MF5700 flow meter.
LCD Display Description
Explains the symbols and information displayed on the MF5700's LCD screen.
Power and Data Cable Description
Details the wire assignment for the MF5700 power and data cable.
Mechanical Dimensions
Provides dimensions for the MF5700 meter and its variations.
Operation and Menu Description
Check Product Specifications
Guides on verifying product specifications before use for optimal performance.
Check Leakage
Instructions for performing a gas leakage check before measurement.
Power Meter and Digital Data Connection
Explains how to power the meter and establish digital data connections.
Wireless Data Communication
Details optional wireless data transmission capabilities and the related APP.
Meter Menu Description
Describes the meter's front 3-key interface for setting functions and accessing data.
Starting the Measurement
Explains how the meter displays measurements after power-up and battery status.
MENU Entry with Verified Password
Details the process for entering the MENU by verifying a password.
Set RS485 Modbus Address
Guides on setting the Modbus address for RS485 communication.
Set RS485 Communication Baud Rate
Explains how to select the communication baud rate for RS485.
Reset or Calibrate Offset
Provides instructions for resetting or calibrating the meter's zero offset.
Gas Conversion Factor (GCF) for Different Gas Measurement
Explains how to apply a gas conversion factor for specific gas measurements.
Set Response Time
Guides on setting the response time for the meter's measurements.
Select Display Mode
Allows users to select between different display modes on the LCD.
Select Display Language
Explains how to switch between available display languages.
Open/Close Valve
Details the procedure for opening or closing the integrated control valve.
Set Alarm: Upper Instant Flow Rate Limit
Allows setting an upper limit for instant flow rate alarms.
Set Alarm: Lower Instant Flow Rate Limit
Allows setting a lower limit for instant flow rate alarms.
Set Alarm: Accumulated Flow Rate or Totalizer Limit
Enables setting alarms for accumulated or totalized flow rate limits.
Change Default Password
Guides on changing the default password for product safety.
Reset Accumulated or Totalized Flow Rate
Instructions for resetting the accumulated or totalized flow rate values.
Exit the MENU
Procedure for exiting the meter's MENU settings.
Sleeping Mode
Explains the automatic and manual sleeping modes for power saving.
Wake Up the Meter
Details how to wake the meter from sleeping mode.
MENU Key Sequence for Settings
Provides a visual flow chart of the MENU key sequences for settings.
RS485 Modbus Communication Protocol
Hardware Connection
Describes the physical hardware connection for RS485 communication.
Communication Parameters
Lists the necessary PC UART communication parameters for Modbus RTU.
Frame Structure
Explains the standard Modbus RTU framing structure.
Function Codes
Lists the Modbus function codes used for setting or reading registers.
Registers Overview
Details the available registers for various functions and parameters.
Product Selection and Order Information
Product Selection Guide
Explains how the product part number is composed and model selection.
Order Contact and Customer Support
Provides information on how to order products and contact customer support.
Technical Notes for Product Performance
Measurement Principle
Explains the MEMS thermal calorimetric sensing technology used in the meter.
Precautions for Best Performance
Lists important precautions for ensuring optimal product performance.
Comparison with Third-Party Reference Meter
Discusses comparing the meter's data with a third-party reference meter.
Particle Contamination and Fluidic Cleanness
Emphasizes the importance of clean fluid medium for accurate measurement.
Application to Different Gas Medium
Discusses using the meter with gases other than the calibration gas.
Need help?
Do you have a question about the MF5712 and is the answer not in the manual?
Questions and answers